Sony STR-DA5700ES User Manual download pdf (Page 139)

139

GB

Additional Information

• If you change the HDMI connection,

connect/disconnect the AC power cord

(mains lead), or there is a power failure,

repeat the procedures of “Preparing for the

“BRAVIA” Sync” (page 76).

• When you select “HDMI B” or “OFF,” the

Control for HDMI function does not work

properly.

• If you select “HDMI A” or “HDMI

A + B,” after you have selected “HDMI B”

or “OFF,” the Control for HDMI function

may not work properly for a while. This is

because the equipment connected to the

HDMI OUT A jack must re-recognize the

receiver that is equipped with the Control

for HDMI function. If the Control for

HDMI function does not work properly for

a long time, perform the steps given in

“Preparing for the “BRAVIA” Sync”

(page 76).

• The types and the number of equipment

which can be controlled by the “BRAVIA”

Sync are restricted in the HDMI CEC

standard as follows.

– Recording equipment (Blu-ray Disc

recorder, DVD recorder, etc.): up to 3

equipment

– Playback equipment (Blu-ray Disc

Player, DVD player, etc.): up to 3

equipment

– Tuner-related equipment: up to 4

equipment

– AV receiver (audio system): up to 1

equipment

When you try to use the One-Touch

Play function, input is not switched as

intended.

• Check the assignment of the HDMI input

(page 80). When you assign multiple

inputs with the same HDMI input jack, if

you use the One-Touch Play function on

the equipment connected to the HDMI

input, the previous input, in its original

input sequence, is preferentially selected.

The Audio Return Channel (ARC) does

not work.

• Make sure “Control for HDMI” is set to

“On” in the HDMI Settings menu.

• Make sure that the INPUT MODE for

“TV” is set to “AUTO” (page 80).

The remote control does not function.

• Point the remote control at the remote

sensor on the receiver (page 9).

• Remove any obstacles in the path between

the remote control and the receiver.

• Replace all the batteries in the remote

control with new ones, if they are weak.

• Make sure that the command modes of the

receiver and the remote control are the

same. If the command mode of the

receiver and the remote control are

different, you cannot operate the receiver

with the remote control (page 87).

• Make sure you select the correct input on

the remote control.

• When you operate a programmed non-

Sony equipment, the remote control may

not function properly, depending on the

model and the maker of the equipment.

The RM SET UP button flashes and you

cannot set up Macro Play (page 124) or

the remote control cannot learn a

remote control code (page 125).

• When the RM SET UP button flashes five

times, replace the batteries with new ones.

If the trouble is other than one of the cases

described above and the trouble is not solved

even if you wait for a while, perform either of

the operations below.

• Press ?/1 on the remote control to turn the

receiver off and then on again.

• Hold down ?/1 on the receiver until the

lamp above the button flashes in green to

reboot the receiver.

Remote control

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 149 150

Comments to this Manuals

No comments