Sony HT-DDWG800 Operations Instructions download pdf (Page 22)

22

GB

HDMI features

• A digital audio signal transmitted by HDMI

can be output from the speakers connected to

this receiver. This signal supports Dolby

Digital, DTS, and Linear PCM.

• This receiver supports xvYCC transmission.

• This receiver supports the Control for HDMI

function. For details, see “Control for

HDMI” (page 57).

Notes on HDMI connections

• Audio signals input to the HDMI IN jack can

only be output from the SPEAKERS jacks

and HDMI OUT jack. The audio input

signals cannot be output from any other

audio jacks.

• Video signals input to the HDMI IN jack can

only be output from the HDMI OUT jack.

The video input signals cannot be output

from the VIDEO OUT jacks or MONITOR

OUT jacks.

• When you want to listen to the sound from

the TV speaker, set “AUDIO FOR HDMI”

to “TV+AMP” in the VIDEO menu (page

43). If you cannot play back multi channel

software, set to “AMP”. However, the sound

will not output from the TV speaker.

• The multi/stereo area audio signals of a

Super Audio CD are not output.

• Audio signals (sampling frequency, bit

length, etc.) transmitted from an HDMI jack

may be suppressed by the connected

component. Check the setup of the

connected component if the image is poor or

the sound does not come out of a component

connected via the HDMI cable.

• Sound may be interrupted when the

sampling frequency, the number of channels

or the audio format of the audio output

signals from the playback component is

switched.

• When the connected component is not

compatible with copyright protection

technology (HDCP), the image and/or the

sound from the HDMI OUT jack may be

distorted or may not be output.

In this case, check the specification of the

connected component.

• You can enjoy multi channel Linear PCM

only with an HDMI connection.

• Set the resolution of the image of the

playback component to 720p, 1080i or

1080p when you output 96 kHz multi

channel sound over an HDMI connection.

• We do not recommend using an HDMI-DVI

conversion cable. When you connect an

HDMI-DVI conversion cable to a DVI-D

component, the sound and/or the image may

not be output.

• You may need to made certain settings on

the image resolution of the player before you

can enjoy multi-channel Linear PCM. Refer

to the operating instructions of the player.

• Refer to the operating instructions of each

connected component for details.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 79 80

Comments to this Manuals

No comments