Sony HT-DDW7000 User Manual download pdf (Page 81)

81

GB

Additional Information

Specifications

Amplifier section

Power Output

Models of area code SP, AU, E51

Stereo mode output (rated) (6 ohms, 1 kHz,

THD 1%)

90 W + 90 W

1)

Surround mode output (reference)

2)

RMS output

FRONT: 185 W per channel

1)

(with SS-MSP5000)

CENTER: 185 W

1)

(with SS-CNP5000)

SURROUND: 185 W per channel

1)

(with SS-SRP5000)

SURROUND BACK:

185 W per channel

1)

(with SS-SRP5000)

1)

Measured under the following conditions:

2)

Reference power output for front, center, surround

and surround back speakers. Depending on the

sound field settings and the source, there may be

no sound output.

Inputs

Analog Sensitivity: 800 mV/

50 kohms

Digital (Coaxial) Impedance: 75 ohms

Outputs (Analog)

AUDIO OUT Voltage: 800 mV/10

kohms

SUBWOOFER Voltage: 2 V/1 kohms

Tone

Gain levels

±6 dB, 1 dB step

Reproduction frequency range:

28 – 20,000 Hz

FM tuner section

Tuning range 87.5 - 108.0 MHz

Antenna FM wire antenna

Antenna terminals 75 ohms, unbalanced

Intermediate frequency

10.7 MHz

AM tuner section

Tuning range

Models of area code SP, AU

With 9-kHz tuning scale:

531 – 1,602 kHz

Models of area code E51

With 10-kHz tuning scale:

530 – 1,610 kHz

3)

With 9-kHz tuning scale:

531 – 1,602 kHz

3)

Antenna Loop antenna

Intermediate frequency

450 kHz

3)

You can change the AM tuning scale to 9 kHz or

10 kHz. After tuning in any AM station, turn off

the receiver. While holding down TUNING

MODE, press ?/1. All preset stations will be

erased when you change the tuning scale. To reset

the scale to 10 kHz (or 9 kHz), repeat the

procedure.

Video section

Inputs/Outputs

Video: 1 Vp-p, 75 ohms

COMPONENT VIDEO:

Y: 1 Vp-p, 75 ohms

P

B/CB: 0.7 Vp-p, 75 ohms

P

R/CR: 0.7 Vp-p, 75 ohms

80 MHz HD Pass Through

Area code Power requirements

SP, AU, E51 240 V AC, 50 Hz

continued

1 2 ... 76 77 78 79 80 81 82 83 84

Comments to this Manuals

No comments