Sony LBT-SH2000 User Manual download pdf (Page 22)

model name [LBT-SH2000]

[4-273-674-81(1)] US

22

US

filename[D:\NORM'S JOB\SONY HA\SO120012\LBT-

SH2000\4273674811_US\US07OTH.fm]

masterpage:Left

Creating a party

atmosphere

(DJ EFFECT)

1 Press the following button to

select the effect type.

• FLANGER: Create a deep flanging

effect that is similar to the roar of a

jet plane.

• ISOLATOR: Isolate a specific

frequency band by adjusting the

other frequency bands. For example,

when you want to focus on only

vocal, etc.

• SOUND FLASH: Flash the sound

output. The sound cuts off

periodically.

• PHASER: Create a series of peaks

and troughs in the frequency

spectrum, like a sweeping effect.

2 Turn DJ CONTROL to adjust the

effect level.

To turn off the effect

Press the selected effect button again.

Notes

• The DJ EFFECT is automatically turned off

when you turn off the system, change the

function or change the tuner band.

• If you activate the DJ EFFECT during

transferring, the sound effect will not be

transferred onto the USB device.

• You cannot use VOLUME/DJ CONTROL to

adjust the volume when the DJ EFFECT is

activated. Press VOLUME +/– on the remote

control to adjust the volume.

Singing along

You can sing along with any audio source

that played back on this system.

1 Turn MIC LEVEL to MIN to

reduce the microphone volume

level.

2 Connect a microphone to the

MIC jack on the unit.

3 Start playing the music and

adjust the volume.

4 Turn MIC LEVEL to adjust the

microphone volume.

If acoustic feedback (howling) occurs,

reduce the volume, move the

microphone away from the speakers,

or change the direction of the

microphone.

After you have finished, disconnect the

microphone.

Note

During transferring, the sound from microphone

will not be transferred onto the USB device.

Changing the lighting

pattern on the

speakers

1

Press OPTIONS.

2 Press / repeatedly to select

“LED SPEAKER”, then press

ENTER.

3 Press / repeatedly to select

the speaker lighting pattern you

want, then press ENTER.

To turn off the lighting, select

“PATTERN OFF”.

Other Operations

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 71 72

Comments to this Manuals

No comments