Sony SLV-EZ727AZ User Manual Page 63

  • Download
  • Add to my manuals
  • Print
  • Page
    / 68
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 62
63
Additional Information
Additional Information
Additional Information
Troubleshooting
If you have any questions or problems not covered below, please consult your nearest
Sony service facility.
Symptom Remedy
Power
The ?/1 ON/STANDBY
switch does not function.
Connect the mains lead to the mains securely.
The power is turned on but the
VCR does not operate.
Moisture condensation has occurred. Turn the power
off, unplug the mains lead and leave the VCR to dry
for over three hours.
The VCR is plugged in but the
display window remains dark.
Set POWER SAVE in the USER SET menu to OFF
(see page 57).
Clock
The clock has stopped and
“– –:– –” appears in the
display window.
The clock stops if the VCR is disconnected from the
mains. Reset the clock (and timer).
Playback
The playback picture does not
appear on the TV screen.
Make sure the TV is set to the video channel. If you
are using a monitor, set it to video input.
If you made connections using the aerial cable only,
make sure the RF channel number is set correctly for
your area.
The picture is not clear. Existing broadcasts may interfere with the VCR.
Reset the RF channel output of your VCR (see
page 17).
Adjust the tracking with the TRACKING +/– buttons
on the VCR.
The video heads are dirty (see the last page of
Troubleshooting). Clean the video heads using the
Sony T-25CLD, E-25CLDR, or T-25CLW video head
cleaning cassette. If these cleaning cassettes are not
available in your area, have the heads cleaned at your
nearest Sony service facility (a standard service
charge will be required). Do not use a commercially
available liquid type cleaning cassette other than
Sony’s, as it may damage the video heads.
The video heads may have to be replaced. Consult
your local Sony service facility for more information.
The picture has no colour. The COLOUR SYSTEM option in the USER SET
menu is set to the wrong position. Set the option to
conform to the system that the tape was recorded in.
The picture rolls vertically
during picture search.
Adjust the vertical hold control on the TV or monitor.
continued
Page view 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68

Comments to this Manuals

No comments