Sony DSR-2000A User Manual download pdf (Page 46)

Chapter 3 Recording and Playback

46 Chapter 3 Recording and Playback

Recording

To change the number of audio channels to be recorded

Change the setting of extended menu item 818 between 2-channel (2CH)

mode and 4-channel (4CH) mode.

Adjusting the audio recording levels

When carrying out audio recording at a reference level

Leave the REC controls pressed in. The audio signals will be recorded at a

preset reference level.

Manually adjusting the recording levels

For each channel, pull out the REC control in the upper control panel, and

adjust so that the audio level indication is 0 dB for an average volume.

Carry out the adjustment in E-E mode.

For details of selecting the E-E mode, see the description of the REC button in the

tape transport control section (page 23) and the PB/EE button in the monitor/

menu/display setting section (page 19).

To change the display range of the audio level meters

Press the METER FULL/FINE button (see page 17).

Setting the reference level

The analog input reference level is determined by the settings of the

AUDIO IN LEVEL/600 Ω switch (see page 33) and extended menu item

811. When, for example, the AUDIO IN LEVEL/600 Ω switch is set to

+4 dBm (HIGH-ON) and extended menu item 811 to –20 dB, the reference

level is set to –20 dB, causing +4 dBm analog input to be converted into a

–20 dBFS digital signal.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 149 150

No comments

Sony DSR-2000A User Manual Page 46