Active Speaker System
RDP-NWD300
©2010 Sony Corporation Printed in Malaysia
Operating Instructions
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain
or moisture.
To reduce the risk of fire, do not cover the ventilation opening of the apparatus with
newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as
lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or
splashing, and do not place objects filled with liquids, such as vases, on the apparatus.
Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
The nameplate is located on the bottom exterior of the system.
The system is not disconnected from the mains as long as it is connected to the AC
outlet, even if the system itself has been turned off.
As the main plug is used to disconnect the system from the mains, connect the system to
an easily accessible AC outlet.
Should you notice an abnormality in the system, disconnect the main plug from the AC
outlet immediately.
Do not expose batteries or apparatus with battery-installed to excessive heat such as
sunshine, fire or the like.
WARNING
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
Notice for customers: the following information is only applicable to
equipment sold in countries applying EU directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo,
108-0075 Japan. The Authorized Representative for EMC and product safety is Sony
Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service
or guarantee matters please refer to the addresses given in separate service or guarantee
documents.
The validity of the CE marking is restricted to only those countries where it is legally
enforced, mainly in the countries EEA (European Economic Area).
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European
countries with separate collection systems)
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste. Instead it shall be handed
over to the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly,
you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this product, please contact
your local Civic Office, your household waste disposal service or the shop where you
purchased the product.
Applicable accessories: Active Speaker System
Disposal of waste batteries (applicable in the European
Union and other European countries with separate
collection systems)
This symbol on the battery or on the packaging indicates that the battery
provided with this product shall not be treated as household waste.
On certain batteries this symbol might be used in combination with a chemical symbol.
The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains
more than 0.0005% mercury or 0.004% lead.
By ensuring these batteries are disposed of correctly, you will help prevent potentially
negative consequences for the environment and human health which could otherwise be
caused by inappropriate waste handling of the battery. The recycling of the materials will
help to conserve natural resources.
In case of products that for safety, performance or data integrity reasons require a
permanent connection with an incorporated battery, this battery should be replaced by
qualified service staff only.
To ensure that the battery will be treated properly, hand over the product at end-of-life to
the applicable collection point for the recycling of electrical and electronic equipment.
For all other batteries, please view the section on how to remove the battery from the
product safely. Hand the battery over to the applicable collection point for the recycling
of waste batteries.
For more detailed information about recycling of this product or battery, please contact
your local Civic Office, your household waste disposal service or the shop where you
purchased the product.
“WALKMAN” and the “WALKMAN” logo are registered trademarks of Sony
Corporation.
Precautions
On safety
AC cord must be changed only at the qualified service shop.
Use only the supplied AC power adaptor. Do not use any other AC power adaptor.
Polarity of the plug
The nameplate is located on the bottom exterior.
Before operating the system, be sure that the operating voltage of the system is
identical with that of your local power supply.
Where purchased Operating voltage
All countries/regions 100 V - 240 V AC, 50/60 Hz
The main unit is not disconnected from the AC power source (mains) as long as it is
connected to the AC outlet, even if the main unit itself has been turned off.
After operating the system with the AC power adaptor, disconnect the AC power
adaptor from the wall outlet if the system is not to be used for an extended period of
time. Just switching the / (power/standby) button to standby does not turn the AC
power adaptor off.
On placement
Do not place the system in an inclined position.
Do not place the system in locations that are hot and subject to direct sunlight, dusty,
very humid, or extremely cold.
Do not leave the system in a location near heat sources, or in a place subject to direct
sunlight, excessive dust, moisture, rain or mechanical shock.
Use caution when placing the system or AC power adaptor on a specially treated
(waxed, oiled, polished, etc.) floor, as staining or discoloration may result.
On cleaning
Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of abrasive pad, scouring powder or solvent
such as alcohol or benzine.
If you have any questions or problems concerning your system, please consult your
nearest Sony dealer.
On operation
Should any solid object or liquid fall into the system, have the system checked by
qualified personnel before operating it any further.
Although this system is magnetically shielded, do not leave recorded tapes, watches,
personal credit cards, or floppy disks with magnetic coding in front of the system for
an extended period of time.
If the TV picture or monitor display is magnetically distorted
Although this system is magnetically shielded, there may be cases that the picture on
some TV sets/personal computer sets may become magnetically distorted. In such a
case, turn off the power of the TV set/personal computer set once, and after 15 to 30
minutes turn it on again. For the personal computer set, take the appropriate measures
such as data storage before turning it off.
When there seems to be no improvement, locate the system further away from the TV
set/personal computer set. Furthermore, be sure not to place objects in which magnets
are attached or used near the TV set/personal computer set, such as audio racks, TV
stands, toys etc. These may cause magnetic distortion to the picture due to their
interaction with the system.
Features
Powerful sound of integrated 10 W output.
Sony’s proprietary Current Drive system for pure and realistic sound.
Music playback and data transfer from the computer one-touch switchable with the
PC MODE button.
Available for charging the “WALKMAN” and operating the “WALKMAN” with the
remote commander.
LINE IN jack for connecting external audio device.
Stylish design integrates with the interior of room.
Front
Rear
To the mains
To DC IN 13V jack
AC power adaptor
(supplied)
AC cord (supplied)
Identifying parts
Main unit (See fig. )
/ (power/standby) button
/ (power/standby) indicator
LINE INPUT button
LINE INPUT indicator
PC MODE button
PC MODE indicator
*1
WM-PORT
*2
plug (for connecting to “WALKMAN”)
(muting) indicator
While muting the sound, the (muting) indicator lights up. When the volume is
the maximum or minimum, the (muting) indicator flashes.
VOLUME +/– button
*3
Remote sensor
LINE IN jack
DC IN 13V jack
WM-PORT jack (for connecting to a computer)
Remote commander (See fig. )
(previous or next track) buttons
(play/pause) button
*4
(fast-rewind/fast-forward) buttons
(stop) button
MUTING (muting) button
The (muting) indicator of the main unit lights up.
/ (power/standby) button
VOL (volume) +/– buttons
*3
*1
While the PC MODE indicator is on, a “WALKMAN” cannot be operated.
*2
The WM-PORT is a dedicated multi-terminal connector, used to connect a “WALKMAN” to its
accessories.
*3
The VOLUME + button has a tactile dot for ease of use.
*4
(play/pause) button has a tactile dot for ease of use.
Notes
Some operations of the remote commander may not work, or work differently as indicated,
depending on the specification of the “WALKMAN” you are using.
When the audio device is connected to the LINE IN jack, the
buttons of the remote
commander do not function.
When a “WALKMAN” is set on the main unit, you can adjust the volume via the main unit, but the
volume setting of the “WALKMAN” will not change.
Loud sound may come out suddenly, depending on the volume settings on each device.
With a “WALKMAN” connected, pressing
on the remote commander may not start playback.
In this case, press any button on the “WALKMAN,” then remote commander operation becomes
available.
Power Sources (See fig. )
Connect the AC power adaptor (supplied) to the DC IN 13V jack of the main unit.
Notes
Turn off the main unit before disconnecting the AC power adaptor. If the AC power adaptor is
connected then disconnected from the main unit without turning off the main unit, it may cause a
malfunction.
Use only the supplied AC power adaptor. Do not use any other AC power adaptor to avoid damaging
the main unit.
The supplied AC cord is only for the main unit. It should not be used with other electric equipment.
Polarity of the plug
Plug the AC power adaptor into an easily accessible mains. In the case of a problem, unplug from the
mains immediately.
Do not place the AC power adaptor on a bookshelf, or in a confined place such as a cabinet.
Do not use the AC power adaptor in a place subject to liquid or moisture to avoid fire or electric
shock. Furthermore, do not place liquid-filled vessels, such as a vase, etc., on the AC power adaptor.
Specifications
Speaker section
Speaker system 50 mm Full range, magnetically shielded
Enclosure type
Bass reflex
Impedance
4 Ω
Maximum input power
7 W
Amplifier section
Practical maximum output 5 W + 5 W (1 kHz, 4 Ω)
Input impedance
LINE IN jack 45 kΩ (at 1 kHz)
General
Power DC 13 V 2 A (via supplied AC power adaptor,
AC 100 V - 240 V power supply)
Input/output
WM-PORT plug × 1, WM-PORT jack × 1, LINE IN
jack (stereo mini) × 1, DC IN jack × 1
Dimensions (w/h/d)
Approx. 285 × 95 × 119 mm
Mass
Approx. 830 g
Operating temperature
5° C to 35° C
Supplied accessories
AC power adaptor (1)
AC cord (1)
Remote commander (1)
Lithium battery CR2025 (1)
(preinstalled for the trial use of the remote commander)
Attachment for “WALKMAN” (2)
Operating Instructions (1)
Warranty card (1)
Design and specifications are subject to change without notice.
Comments to this Manuals