Sony KDL-52X2000 User Manual download pdf (Page 7)

Start-up Guide

When the TV is in standby mode (the 1 (standby)

indicator on the TV (front) is red), press TV "/1

on the remote to switch on the TV.

3 Press F/f/G/g to select the language

displayed on the menu screens, then press

4 Press F/f to select the country/region in

which you will operate the TV, then press

If the country/region in which you want to use the

TV does not appear in the list, select “-” instead of

a country/region.

The message confirming the TV start auto-tuning

appears on the screen, then go to “7: Auto-tuning

the TV”.

7: Auto-tuning the TV

The TV will search for and store all available TV

channels.

1 Before you start auto-tuning the TV, insert

a pre-recorded tape into the VCR

connected to the TV (page 5) and start play

back.

The video channel will be located and stored on

the TV during auto-tuning.

If no VCR is connected to the TV, skip this step.

2 Press G/g to select “OK”, then press .

The TV starts searching for all available digital

channels, followed by all available analogue

channels. This may take some time, please be

patient and do not press any buttons on the TV or

remote.

If a message appears for you to confirm the aerial

connection

No digital or analogue channels were found.

Check the aerial connection and press G/g to

select “Yes”, then press to start auto-tuning

again.

Continued

1 2 3 4 5 6 7 8 9 10 11 12 ... 159 160

No comments

Sony KDL-52X2000 User Manual Page 7