Sony KDL-32S3000R User Manual download pdf

KDL-26S3000

KDL-32S3000

KDL-40S3000

KDL-46S3000

Quick Setup Guide

For further information, see the Operating Instruction Manual supplied with the TV.

Please retain this guide for your future reference.

KDL-26/32/40/46S3000/KDL-32/40SL130 EN 3-196-473-12(1)

KDL-32SL130

KDL-40SL130

Initial Setup instructions are displayed on the screen when your BRAVIA™ is powered on

for the first time.

1 Select the language for the OSD (on screen display).

Step 1 of 5

Initial Setup

Please select a language. Language settings will apply to

on screen display as well as default audio for digital

channels. Highlight a choice and press to continue.

English

Español

Français

2 Connect either Antenna or Cable to your TV.

Step 2 of 5

Initial Setup

Auto Program allows the TV to tune channels directly from your

cable or antenna feed. If you are using only a cable or satellite

set top box, it is not necessary to run Auto Program. In this case,

choose “Skip”. Auto Program may take 30+ minutes to complete.

Auto Program

Skip

VHF/UHF/CABLE

3 Your TV will detect the type of signal connected and will start scanning for the channels.

Initial Setup Step 3 of 5

Please allow 30+ minutes to complete.

Pressing or will cancel auto program.

Channels Found

Searching...

Analog: 58

Digital: 0

4 Follow on-screen instructions to complete setup and begin viewing your TV.

Step 5 of 5

Initial Setup

Select

“OK” to use your TV

Connecting Your TV

Your BRAVIA™ TV must be properly connected to components such as sound system and cable or satellite box.

See reverse side of this poster for sample connection diagrams.

Turn off and unplug all components before making connections.

Do not turn on the TV until connection setup is completed.

Audio/Video

Performance

Input

Connector

Video Connection Audio Connection High or Standard Definition Quality

HDMI 1

HDMI 2

HDMI connection*

HDMI cable carries both video and audio signals.

Separate audio cable is not needed.

(*When HDMI is connected to DVI with an adapter,

a separate audio L/R is necessary.)

1080p, 1080i, 720p, 480p, 480i, PC

(Compatible with HD or SD content)

Component 1

Component 2

Component connection

Audio L/R

1080p, 1080i, 720p, 480p, 480i

(Compatible with HD or SD content)

Video 1

Video 2

S VIDEO connection

(Use this connector in place of composite video connector)

Audio L/R

480i

(SD content)

Video 1

Video 2

Video 3

Composite video connection

(Shown with video and audio connectors)

Audio L/R

What is HDMI™?

HDMI (High-Definition Multimedia Interface) cables are the standard for connecting HDTV. They are built to properly handle high bandwidth, uncompressed video and multi-channel

audio—all in one cable.

Connecting a PC to Your BRAVIA™

May require DVI-to-HDMI adapter and separate audio connector.

Connect PC’s audio output when using a Digital Video Interface (DVI) or HD15 connection.

Press PC’s FUNCTION Key + Select Output to transmit to TV.

When using an HD15 connection, adjust TV’s Pitch and Phase to correct sharpness.

Refer to your BRAVIA™ Operating Instruction Manual for more information.

To learn more about HDTV, visit www.sony.com/HDTV

■

Select Auto Program to advance to the

Auto Programming.

If you are not using the VHF/UHF/CABLE

connection to TV, you can cancel the Auto

Program by selecting the Skip option.

To Access Initial Setup by Remote Control

If you did not follow the Initial Setup screen the first time, press the HOME button on your

remote control to display the TV Home Menu/XMB™ (XrossMediaBar) and select the Initial

Setup icon under the Settings category.

1 XMB™ (XrossMediaBar) appears.

HDMI Settings

General

1.2.3

2 Select Initial Setup icon.

1.2.3

.2.

Start Initial Setup now?

Some channels may be overwritten.

Ye s

Settings

To Do List

When the Initial Setup is completed, consider carrying out these items:

Set Clock

Set Closed Captions (CC)

Set Parental Lock

Show/Hide Channels

Label Inputs (skip inputs)

Speakers On/Off

For details, refer to your BRAVIA™ Operating Instruction Manual.

Watching Your TV

Your New BRAVIA

™

Congratulations! Your new BRAVIA™ TV opens the door to the “Stunning HD Experience”.

This guide will explain how to get the most from your new High Definition TV.

Learn more. Visit the Sony HDTV Learning Center www.sony.com/HDTV

Please take these steps before you power up your BRAVIA™:

www.sony.com/registration (from U.S.A.)

www.SonyStyle.ca/registration (from Canada)

Make sure you’ve removed all accessory contents from packaging.

Install 2 AA batteries (supplied separately) in your remote control.

Determine whether you will hang your TV on a wall or place it on a floor stand. Sony

wall mounting brackets are designed to provide the best fit.

Give your TV 2 3/8 inches (6 cm) of space behind it to properly ventilate.

The Four Steps to a Stunning HD Experience: Set, Sound,

Source, and Setup

Along with your BRAVIA™ TV set, a complete HD system requires an HD sound system, a

source of HD content, and proper setup connection with components such as your HD cable

or satellite box.

You must get HD programming to experience the stunning detail of HDTV.

The quality of the image you see on your BRAVIA™ can only be as high as the quality of the

signal it is displaying. This chart shows the different signal types and how to access them.

Comments Sources

High Definition

Content

Best Picture Quality 16:9

Aspect Ratio

HD Over-The-Air Antenna

HD Cable Subscription/

Programming

HD Satellite Subscription

Digital Content

Good Picture Quality

Aspect Ratio based on

Program

Over-The-Air Antenna

Digital Cable Subscription

Digital Satellite

Subscription

Analog Content

Original TV format 4:3

Aspect Ratio

Over-The-Air Antenna

Cable Subscription

Contact your cable or satellite provider to upgrade your service to HD. Receive over-the-air

HD broadcasts with an HD-quality antenna (www.antennaweb.org) and discover the wealth

of entertainment now available on super-high-resolution Blu-ray Disc™.

■

Flat-panel LCD HDTV

Best Signal

Performance

3-196-473-12(1)

For Your Convenience

Please contact Sony directly if you have questions on the use of your television

after reading your Quick Setup Guide and Operating Instruction Manual.

Contact Sony Customer Support at:

http://www.sony.com/tvsupport

Or to speak with a support representative:

United States Canada

1-800-222-SONY (7669) 1-877-899-SONY (7669)

Please Do Not Return the Product to the Store

Running Initial Setup

Select Your Content Source

Whether you are watching cable, satellite or broadcast TV; playing a VCR, DVD or Blu-ray

Disc™; or connecting to your PC, you need to choose the correct Input using your remote

control:

Press the HOME button on your remote control to display on-screen the TV mode or

External Inputs selection menu; OR

Press the INPUT button repeatedly until your selection is highlighted on-screen.

Adjust Screen Shape and Aspect Ratio

High Definition and Standard Definition signals are transmitted with different aspect ratios

(the width-to-height shape of the image). Most HD signals use a widescreen aspect ratio of

16:9. Most SD signals use a boxy 4:3 aspect ratio. The 16:9 aspect ratio looks perfect on your

BRAVIA™, but a 4:3 image must be adjusted to look right. You can:

Adjust your TV so boxy 4:3 images are automatically re-configured (zoomed or

stretched) to fit the wide TV screen; OR

Watch SD content in its original, boxy format with wide black bars surrounding the

image to fill in unused space (for example, you may prefer to watch an old classic movie

in its original 4:3 format, not reconfigured for a wide screen).

Press the WIDE button on your remote control to display the Wide Mode setting of

your preference.

Visit

www.learningcenter.sony.us/HomeAudioandVideo/Televisions/Research1/TheBasicsofDTV

for more information.

Customize Sound and Picture Quality

You can choose optimum sound and picture settings to match the content you are displaying

on your TV:

Press the HOME button on your remote control and select Picture or Sound. Choose

the appropriate setting for your content.

Use the remote control OPTIONS button to quickly adjust sound and picture quality.

Refer to your BRAVIA™ Operating Instruction Manual for more information.

To learn more about HDTV, visit www.sony.com/HDTV

■

XMB™ (XrossMediaBar) with focus on

Settings. Select Settings to customize

your TV.

Product Support

Clock/Timers

Sound

Screen

Video Options

XMB™ (XrossMediaBar) with focus on TV

mode. Select the channels from here or

use the 0-9 number buttons on your

remote control.

Cable KFMB-DT

10.1

8.1

XMB™ (XrossMediaBar) with focus on

External Inputs. Select connected device

from here or use the INPUT button on

your remote control.

Video3

Video2

Component2

HDMI1

HDMI2

1 2

Your New BRAVIA 1

Summary of Contents

Page 1 - Your New BRAVIA

KDL-26S3000KDL-32S3000KDL-40S3000KDL-46S3000Quick Setup GuideFor further information, see the Operating Instruction Manual supplied with the TV.Please

Page 2

KDL-26/32/40/46S3000/KDL-32/40SL130 EN 3-196-473-12(1)Required Cable Types for Connection Notes on Connection:Your TV is equipped with two HDMI inputs