Sony RM-TP504 User Manual download pdf (Page 5)

Preparations

]

}

]

}

]

}

Please be sure to carry out the procedures described in

“Setting up the commander” on page 6 after inserting the

batteries.

Inserting batteries into the commander

Insert the four size-AA (LR6) alkaline batteries (for

commander operation) and the lithium battery (for

preservation of the commander’s internal memory).

1 Remove the battery compartment cover.

2 Insert the alkaline batteries.

3 Insert the lithium battery.

After wiping the lithium battery thoroughly with a

dry cloth, insert it into the compartment with the

positive (+) pole side facing up.

Preparing the Commander

4 Close the battery compartment cover.

After inserting the batteries, touching the touch panel

turns on the light and displays the touch panel (LCD)

adjustment screen. Follow the procedure on the next page

for touch panel adjustment and initial communication.

You can also use an AC power adapter (not supplied)

instead of the four alkaline batteries.

Connect an AC power adapter (DC 300 mA minimum, 6V)

(not supplied) to the DC input jack on the remote commander

(see 7 on page 10).

Note!

Be sure to insert the plug of the AC power adapter fully into

the DC input jack.

If the plug of the AC power adapter is fully inserted, there

may be no problem when you also use batteries. However, if

the plug is not fully inserted and the batteries are also used, it

may cause a malfunction depending on the adapter (or

depending on the plug if the tip is not insulated).

When you are going to use the AC power adapter only for a

long time, it is recommended to remove alkaline batteries.

We recommend the use of Sony AC-E60HG (AC power

adapter).

Notes

• The LCD lights up when touched. The LCD also lights up

when BACK LIGHT/COMMANDER OFF button is pressed.

• VOL +/–, MUTING and SLEEP can be used even when the

LCD is not lit.

• Pressing BACK LIGHT/COMMANDER OFF turns the

backlight on or off. Holding it down for about 2 seconds turns

the LCD off.

• If the commander is not used for 10 seconds, the LCD turns off

automatically (Auto Off function). The Auto Off function can

be changed between 10 and 30 seconds under “Setting the LCD

to turn off automatically” in the SETUP screen (see page 29).

Push in direction of

arrow

Always insert the negative (–) pole

side of batteries first.

Size-AA alkaline batteries

Coin shaped lithium

battery CR2032

Positive (+) pole side up

Polarity of the plug

1 2 3 4 5 6 ... 36

Comments to this Manuals

No comments

Sony RM-TP504 User Manual Page 5

Comments to this Manuals

Related products and manuals for Remote control Sony RM-TP504