Sony MZ-N1 User Manual download pdf (Page 91)

NAME FULL • You tried to enter more than 200 letters to label a single track,

group, or disc.

• You tried to enter a total of more than approximately 1,700 letters

for track or disc names.

, Enter a shorter name for the track, group, or disc (page 50), or

set the “LP Stamp” setting to “Stamp OFF” so that “LP:” is not

added at the beginning of the track name (page 30).

NO BATT • The rechargeable battery is not inserted.

, Insert a rechargeable battery.

NO COPY • You tried to make a copy from a disc that is protected by the Serial

Copy Management System. You cannot make copies from a

digitally connected source which was itself recorded using digital

connection.

, Use analog connection instead (page 29).

NO DISC • You tried to play or record with no disc in the recorder.

, Insert an MD.

No Entry! • You tried to erase a setting in the Personal Disc Memory on a disc

that contains no settings in the Personal Disc Memory.

NO SIGNAL • The recorder could not detect digital input signals.

, Make sure that the source is connected firmly (page 20).

P/B ONLY • You tried to record or edit on a pre mastered MD (P/B stands for

“playback”).

, Insert a recordable MD.

PROTECTED • You tried to record or edit on a MD with the tab in the record-

protect position.

, Slide the tab back (page 75).

REC ERR • Recording was not correctly done.

, Place the recorder at a place with no vibrations and record

again.

• The disc is soiled with an oil film or finger prints, is scratched, or

is not a standard disc.

, Try recording again with another disc.

READ ERR • The recorder cannot read the disc information correctly.

, Reinsert the disc.

Error message Meaning/Remedy

1 2 ... 86 87 88 89 90 91 92 93 94 95 96

No comments

Sony MZ-N1 User Manual Page 91