Sony STR-D515 User Manual download pdf (Page 9)

Receiving FM/AM Broadcasts

Tuning in a Station Directly — Direct Tuning

To correct the entered frequency

Repeat steps 3 to 4.

If you enter a frequency not covered by the tuning

interval

The entered value is automatically rounded up or down to

the closest value covered by the tuning interval.

Tuning intervals for direct tuning are the followings:

FM: 50 kHz interval

AM: 10 kHz mterved (for U.S.A. and Canadian models)

9 kHz interval (for U.K. and Australian models)

(To switch the tuning interval between 9 kHz and 10 kHz,

see page 21.)

When the entered frequency does not exist in the

receivable frequency range

The entered digits (up to 5 digits for FM or up to 4 digits for

AM) blink in the frequency display area, and reception does

not take place.

If this occurs, press DIRECT again, and enter the correct

frequency. The frequency range of the receiver is 87.50 to

108.0 MHz for FM, and 530 to 1710 kHz with 10 kHz interval

(U.S.A. and Canadian models) or 531 to 1602 kHz with 9

kHz interval (U.K. and Australian models) for AM.

When an FM stereo program is noisy

When the unit receives an FM stereo program, the STEREO

indicator lights in the display vnndow. If the stereo program

is noisy, press FM MODE to change the mode over to

MONO. This eliminates the stereo effect, but the noise will

be greatly reduced.

To return to the stereo mode, press FM MODE again.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

No comments

Sony STR-D515 User Manual Page 9