Sony XR-C9100 User Manual download pdf

FM/AM

Cassette Car

Stereo

Installation/Connections

*I-3-864-309-11* (1)

Mark the position for the supplied screw.

Use the screw holes on the mounting hardware 9 to mark

the position.

Choose the exact location for mounting the rotary

commander, then clean the mounting surface.

Dirt and oil impair the adhesive strength of the double-sided

adhesive tape.

Remove the steering wheel column cover, and drill 2 mm

(

/32 in.) diameter hole at the marked position.

Warm the mounting surface and the double-sided adhesive tape on the mounting

hardware 9 to a temperature of 20°C (68°F) to 30°C (86°F), and attach the mounting

hardware to the mounting surface applying even pressure. Use the supplied screw 8

to set into secure position.

Attach a piece of heavy duty tape etc. on the other side of the mounting surface to cover the

protruding tips of the screws so they will not interfere with any electrical cables etc. inside the

steering wheel column.

After reinstalling the steering wheel column cover, attach the rotary commander to

the mounting hardware by aligning the four holes on the bottom of the rotary

commander with the four catches on the mounting hardware and sliding the rotary

commander until it locks into place as illustrated.

Note

If you are mounting the rotary commander on the steering wheel column, make sure that the

protruding tips of the screws on the inner surface of the column do not in any way hinder or

interfere with the movement of the rotating shaft, operative parts of the switches or the

electrical cables etc. inside the column.

Mark

Notes

• Choose the mounting location carefully so the

rotary commander will not interfere with

operating the car.

• Do not install the rotary commander in a place

where it may jeopardize the safety of the (front)

passenger in any way.

• When installing the rotary commander, be sure

not to damage any electrical cables etc. on the

other side of the mounting surface.

• Avoid installing the rotary commander where it

may be subject to high temperatures, such as

from direct sunlight or hot air from the heater

etc.

Example of a mounting location

Heavy duty tape etc.

Cut the mounting hardware 9, If necessary.

Holes

Caution

Cautionary notice for handling the bracket 1.

Handle the bracket carefully to avoid injuring your fingers.

After connecting, bundle up the connecting cord of the rotary

commander with other connecting cords of the audio equipment by

attaching the supplied cramper !¡. Be sure to leave some slack in the

connecting cord between the plug and the cramper.

!¡

Sony Corporation  1998 Printed in Japan

XR-C9100

Parts for installation and connections

The numbers in the list are keyed to those in the instructions.

1 2

TOP

× 4

587

!º9

× 2

Installing the rotary commander

!¡

1 2 3 4

Summary of Contents

Page 1 - Cassette Car

FM/AMCassette CarStereoInstallation/Connections*I-3-864-309-11* (1)Mark the position for the supplied screw.Use the screw holes on the mounting hardwa

Page 2 - Installation

TOPInstallationPrecautionsNoteTo prevent malfunction, install only with the supplied screws 4.15cmBefore installing the unit, detach the front panel.A

Page 3 - Connections

ConnectionsCautionIf your car has no accessory position on the ignition key switch — POWER SELECT switchReset buttonWhen the installation and connecti

Page 4 - Inverter

Connection example*BUS AUDIO INSUB OUTLINE OUT REARLINE OUT FRONTREMOTE INBUS CONTROL IN!ºAMP REMBlue/white stripedMax. supply current 0.3 ATo connect

Comments to this Manuals

No comments

Sony XR-C9100 User Manual

Browse online or download User Manual for Motorcycle Accessories Sony XR-C9100. Sony XR-C9100 Installation guide

Summary of Contents

Comments to this Manuals

Related products and manuals for Motorcycle Accessories Sony XR-C9100