Sony MZ-NH1 User Manual download pdf (Page 38)

38

Adjusting the recording

level manually

The recording level is adjusted

automatically while recording. If

necessary, you can set the recording level

manually during both analog and digital

recording.

1 While pressing X, press and slide

zREC.

The recorder stands by for recording.

2 Enter the menu and select “REC Set”

- “RECVolume” - “Manual” (“REC

Settings” - “REC Volume” -

“Manual” on the remote control).

3 Play the source.

4 While observing the level meter in the

display, adjust the recording level by

pressing the 5-way control key

towards

FR or FF (turn the jog dial on

the remote control).

Set the level so that the meter

segments light up around –12dB

segment.

If a high sound level causes the level

meter to reach the OVER segment,

lower the recording level.

5 Press X again to start recording.

If your source is an externally

connected component, play the

source to the beginning of the

material to be recorded, and then start

recording.

To switch back to automatic

level control

Select “Auto(AGC)” (“Auto (AGC)” on

the remote control) in step 2.

• You cannot adjust the left and right channel

levels separately.

• Once you stop recording, the recorder will

revert to automatic recording level adjustment

mode the next time you start a recording

operation.

• To adjust the recording level manually during

synchro-recording, do steps 1 to 4 of the

procedure in this section with “SYNC REC”

is set to “SYNC REC Off”. Afterwards, set

“SYNC REC” setting to “SYNC REC On”,

and start recording (page 41).

zREC

X

5-way control key

(NENT, FR, FF)

Jog dial

MENU

Notes

Display window on the remote control

Display window on the recorder

Volume

decreases

increases

–12dB OVER

–12dB

OVER

Volume

decreases

increases

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 127 128

Comments to this Manuals

No comments