Sony BDV-NF7220 User Manual download pdf (Page 57)

57

GB

BDV-NF7220

4-485-836-E1(1)

D:\NORM'S JOB\SONY HA\SO130046\BDV-

N9200_7200_5200_E3200\4485836E11_ZE (NF7220)\100ADD.fm

masterpage:

Right

Additional Information

appears without any messages on

the entire TV screen.

t Contact your nearest Sony dealer or

local authorized Sony service

facility.

“NOT.USE” appears in the top panel

display when you press any of the

sound field buttons (page 14).

t The setting for the sound field

buttons cannot be changed when

the [Sound Effect] is set to other

than [Sound Field On]. Set [Sound

Effect] in [Audio Settings] to [Sound

Field On] (page 48).

There is no picture or the picture is not

output correctly.

t Check the output method on your

system (page 18).

t Touch and hold N and VOL – on

the main unit for more than

5 seconds to reset the video output

resolution to the lowest resolution.

t For BD-ROMs, check the [BD-ROM

24p Output] settings in [Screen

Settings] (page 46).

There is no picture when you make an

HDMI cable connection.

t The main unit is connected to an

input device that is not HDCP (High-

bandwidth Digital Content

Protection) compliant (“HDMI” in

the top panel does not light up)

(page 18).

3D images from the HDMI (IN 1) or

HDMI (IN 2) jack do not appear on the

TV screen.

t Depending on the TV or video

equipment, 3D images may not

appear.

The dark area of the picture is too dark/

the bright area is too bright or

unnatural.

t Set [Picture Quality Mode] to [Auto]

(default) (page 35).

Picture noise appears.

t Clean the disc.

t If the picture output from your

system goes through your

equipment to get to your TV, the

copy-protection signal applied to

some BD/DVD programs could

affect picture quality. If you still

experience problems even when

you connect your main unit directly

to your TV, try connecting your main

unit to the other input jacks.

An image is not displayed on the entire

TV screen.

t Check the setting of [TV Type] in

[Screen Settings] (page 45).

t The aspect ratio on the disc is fixed.

Color irregularity occurs on the TV

screen.

t If the speakers are used with a CRT-

based TV or projector, install the

speakers at least 0.3 meters from

the TV set.

t If the color irregularity persists, turn

off the TV set once, then turn it on

after 15 to 30 minutes.

t Make sure that no magnetic object

(magnetic latch on a TV stand,

health care device, toy, etc.) is

placed near the speakers.

There is no sound.

t The speaker cords are not

connected securely.

t Check the speaker settings

(page 40).

Picture

Sound

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 71 72

Comments to this Manuals

No comments