Sony SCPH-55006 GT User Manual download pdf (Page 25)

DVD videos

This product incorporates copyright protection

technology that is protected by method claims

of certain U.S. patents and other intellectual

property rights owned by Macrovision

Corporation and other rights owners. Use of

this copyright protection technology must be

authorized by Macrovision Corporation, and is

intended for home and other limited viewing

uses only unless otherwise authorized by

Macrovision Corporation. Reverse engineering

or disassembly is prohibited.

x MPEG

Selects the MPEG AUDIO signals to be output

via the DIGITAL OUT (OPTICAL) connector.

• On : when the console is connected to audio

equipment with a built-in MPEG decoder.

If the console is connected to audio

equipment without a built-in MPEG decoder,

do not turn this option on. Otherwise, when

you play the MPEG sound track, a loud noise

(or no sound) will come out from the

speakers, possibly hurting your ears or

damaging the speakers.

• Off : when the console is connected to audio

equipment without a built-in MPEG decoder.

x Audio Track Auto Select Mode

Gives the audio track that contains the highest

number of channels priority when you play a

DVD on which multiple audio formats (PCM,

Dolby Digital DTS or MPEG AUDIO format)

are recorded.

This setting is not available during Resume

Play.

• On: Priority given

• Off: No priority given

Notes

• If you set this item to “On,” the language may change

because the “Audio Track Auto Select Mode” setting

has higher priority than the “Audio” settings in

“Language Setup” (page 21).

• If you set “DIGITAL OUT (OPTICAL)” to “On” and

“DTS” to “Off” in “Audio Setup”, the DTS audio track

is not played even if you set this item to “On” and the

highest-numbered audio channel is recorded in DTS

format.

• If PCM, DTS Dolby Digital and MPEG AUDIO audio

tracks have the same number of channels, the console

selects PCM, Dolby Digital DTS and MPEG AUDIO

audio tracks in this order.

• Depending on the DVD, the audio channel with

priority may be predetermined. In this case, you cannot

give priority to the DTS Dolby Digital or MPEG

AUDIO format by selecting “On”.

x DVD Volume

If the audio output level of the DVD is low, you

can turn up the volume of the DVD. DIGITAL

OUT (OPTICAL) must be set to “Off” to change

this setting.

• +2: Turns up the volume (maximum).

• +1: Turns up the volume.

• Standard: Original audio volume. Normally

select this position.

Note

If you set this option to “+1” or “+2”, the sound may be

distorted in places where loud sound is present. If the

sound becomes distorted, select "Standard".

Caution

If you turn up the volume too high, your ears may be

injured or the speakers may be damaged.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 55 56

Comments to this Manuals

No comments

Sony SCPH-55006 GT User Manual Page 25

Comments to this Manuals

Related products and manuals for DVD players Sony SCPH-55006 GT