Sony RDR-HX900 User Manual download pdf (Page 24)

24

10Select the setting that matches your TV

type.

“16:9”: For wide-screen TVs or standard TVs

with a wide screen mode.

“4:3 Letter Box”: For standard TVs.

Displays “wide screen” pictures with bands

on the upper and lower sections of the screen.

“4:3 Pan Scan”: For standard TVs.

Automatically displays “wide screen”

pictures on the entire screen and cuts off the

sections that do not fit.

For details, see “TV Type” on page 88.

11Press ENTER.

The Setup Display for the component out

jacks appears.

12Select an option.

Select “On” if you are using the

COMPONENT VIDEO OUT jacks.

Otherwise, select “Off.”

13Press ENTER.

The Setup Display for the LINE 3/DECODER

jack appears.

14Select an option.

Select “Yes” if you will connect a decoder to

the LINE 3/DECODER jack. Otherwise,

select “No.”

15Press ENTER.

The Setup Display for selecting the type of

video signal output from the LINE 1-TV jack

appears.

16Select the type of signal you want to output

from the LINE1-TV jack.

“Video”: Outputs video signals.

“S Video”: Outputs S video signals.

“RGB”: Outputs RGB signals.

Note that if you select “On” in step 12, you

cannot select “RGB,” and that if you select

“Yes” in step 14, you cannot select “S Video.”

• If you select “S Video” or “RGB,”

SMARTLINK will be deactivated.

17Press ENTER.

The Setup Display for selecting the type of

jack used to connect to your amplifier

(receiver) appears.

18Select the type of jack (if any) you are

using to connect to an amplifier (receiver),

and press ENTER.

If you did not connect an AV amplifier

(receiver), select “No,” then go to step 22.

If you connected an AV amplifier (receiver)

using just an audio cord, select “Yes: LINE

OUT (R-AUDIO-L),” then go to step 22.

If you connected an AV amplifier (receiver)

using either a digital optical or coaxial cord,

select “Yes: DIGITAL OUT.”

19Select the type of Dolby Digital signal you

wish to send to your amplifier (receiver).

If your AV amplifier (receiver) has a Dolby

Digital decoder, select “Dolby Digital.”

Otherwise, select “D-PCM.”

EASY SETUP

TV Type 5/9

Select your TV screen type.

16 : 9

4 : 3 Letter Box

4 : 3 Pan Scan

EASY SETUP

Line1 Output 8/9

Select the Line1 output signal.

Video

S Video

RGB

EASY SETUP

Audio Connection 9/9

Is this recorder connected to an amplifier (receiver)?

Select the type of jack you are using.

Yes :

LINE OUT(R-AUDIO-L)

Yes :

DIGITAL OUT

No

Audio Connection 9/9

Dolby Digital

D-PCM

Dolby Digital

EASY SETUP

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 119 120

Comments to this Manuals

No comments