Sony BDP-S765 User Manual download pdf (Page 58)

58

2

Press ,, and enter the next character.

3 Press the blue button (“Finish”) to finish.

Available buttons

1 Connect a DLNA certified device to the

network set in “Step 4: Connecting to

the Network” on page 24, and set up

the DLNA certified device as a home

server.

For details, refer to the instruction

manual supplied with the DLNA

certified device.

b

When a firewall is set for the DLNA certified

device, disable the function. For details, refer

to the instruction manual supplied with the

DLNA certified device.

2 Press HOME.

3 Select (Setup) using </,.

4 Select “Connection Server Settings”

in “Network Settings,” and press

ENTER.

The connected server list appears.

If no server appears in the server list,

press OPTIONS to select “Update Server

List,” and press ENTER.

5 Press OPTIONS to select “Network

Diagnostic,” and press ENTER.

6 Select “Start,” and press ENTER.

The network diagnostic starts.

Results are displayed after the player

finishes running the network diagnostic.

• To display detailed results for a server,

select a server using M/m, and press

ENTER. To go back to the results

display, select “Close,” and press

ENTER.

7 Press RETURN to return to the server

list.

8 Press RETURN to exit.

To display/hide a server

1 While the connected server list is

displayed, select a server using M/m, and

press ENTER.

2 Select “Shown” or “Hidden” using M/m,

and press ENTER.

When you select “Hidden,” the server

will not be displayed in the photo

category.

z

You can hide a server in the photo category as well.

Select the server using M/m, and press OPTIONS to

select “Hidden,” then press ENTER.

Buttons Details

Red button

(Letter Type)

Switches the keyboard

between alphabet and

numbers.

Green button

(A/a)

Switches the keyboard

between upper case and

lower case.

Yellow button

(Symbol)

Displays the keyboard for

symbols.

Blue button

(Finish)

The input is entered, and

the player returns to the

previous display.

CLEAR

(Clear/Clear All)

Erases the selected

character.

To erase all displayed

characters, press and hold

CLEAR for 2 seconds or

more.

RETURN

(Cancel)

Returns to the previous

display, cancelling the

input.

</M/m/,,

ENTER

• Select an input function

using </M/m/,, and

press ENTER.

• Enter characters as

follows:

1Select a

character selection panel

using </M/m/,, and

press ENTER.

2Select a

character using </,,

and press ENTER.

Connection Server Settings

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 74 75

Comments to this Manuals

No comments