Sony KLV-26S200A User Manual download pdf (Page 32)

KLV-46S200A

2-698-937-13(1)

Troubleshooting

Check whether the 1 (standby) indicator is flashing in red.

When it is flashing

The self-diagnosis function is activated.

1 Measure how many times the 1 (standby) indicator blinks.

For example, the indicator blinks six times, and stops blinking for three seconds.

2 Press 1 on the TV (top side) to switch it off, disconnect the AC power cord and inform your dealer or

Sony service center of how the indicator flashes (duration and interval).

When it is not flashing

1 Check the items in the tables below.

2 If the problem still persists, have your TV serviced by qualified service personnel.

Picture

Problem Cause/Remedy

No picture (screen is dark) and

no sound

• Check the power cord, antenna, and VCR connection.

• The TV is not turned on. Press

1 on the TV (top side).

• If the 1 (standby) indicator lights up in red, press "/1.

No picture

• The picture off feature is activated. (The (Picture Off/Sleep Timer)

indicator lights up in green.) Press any button except for 2 +/-, "/1, % to

cancel the picture off feature.

No picture or no menu

information from equipment

connected to the video input

jack

• Check that the optional equipment is on and press repeatedly until

the correct input symbol is displayed on the screen.

• Check the connection between the optional equipment and the TV.

Distorted picture

• Check if any connected optional equipment is installed in front of the TV or

beside the TV. When installing optional equipment, leave some space

between the optional equipment and the TV.

• When changing programs or selecting Text, turn off any equipment

connected to the video input jack on the rear of the TV.

• Broadcast signals are too strong. Turn off or disconnect the booster if it is in

use.

Double images or ghosting

• Check antenna/cable connections.

• Check the antenna location and direction. Contact a Sony dealer for advice.

• Broadcast signals are reflected by nearby mountains or building. Use the

fine tuning (“AFT”) function (page 27). Otherwise, use a highly direction

antenna.

• Use of a booster is inappropriate. Turn off or disconnect the booster if it is in

use.

Snowy picture and noisy sound

• The antenna connection is loose or the antenna cable is damaged. Check the

cable and connection on the TV, VCR, and on the wall (page 4).

• Channel presetting is inappropriate or incomplete. Perform “Manual

Program Preset” in the “Channel Setup” menu to preset the channel again

(page 27).

• The antenna type is inappropriate. Check the antenna type (VHF/UHF).

Contact a Sony dealer for advice.

• Adjust the antenna direction. Contact a Sony dealer for advice.

• Signal transmission is low. Try using a booster.

010COV.book Page 32 Monday, February 5, 2007 8:56 AM

1 2 ... 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Sony KLV-26S200A User Manual Page 32

Comments to this Manuals

Related products and manuals for CRT TVs Sony KLV-26S200A