Sony DPP-FP60 Operations Instructions download pdf (Page 30)

30

GB

For printing procedures, refer to the

manual of the Bluetooth device you

use.

To select the printer from a Bluetooth-

compliant device, select “Sony DPP-

FP60 ##”. (“##” stands for the two

figures from the right of the address

displayed in the LCD screen.):

When input of Pass code* is required

Input “0000”. You cannot change the pass

cord with the printer.

* Pass code is often referred to as “pass

key” or “PIN code”.

Notes

•

The communication distance of the product

may vary depending on the obstacles between

the product (a human body, metal object, or

wall) and mobile phone or other device.

• Sensitivity of the Bluetooth communication

may be affected in the following conditions:

- When there is an obstacle between the

product and the mobile phone or other

product such as a human body, metal object,

or a wall.

- Were a wireless LAN is established or a

microwave oven is being used near-by, or

other electromagnetic wave is emitted.

• Since a Bluetooth device and a wireless LAN

(IEEE802.11b/g) device use the same frequency

ranges, wave interferences may occur when the

product is used near a device equipped with a

wireless LAN. This may cause deterioration in

the communication speed and connection

conditions. If this occurs, take the following

measures:

- Keep a distance of at the nearest 10 m from a

wireless LAN device when you connect the

product to the mobile phone.

– Turn off the wireless LAN device in case you

should use the product within 10 m from the

wireless LAN device.

• It is not guaranteed that this product works

with all devices enabled with Bluetooth

wireless technology.

• Do not use the DPPA-BT1 outsides the area you

purchased it. Depending on the areas, the use

of this product may infringe the wave

regulations and may be subject to its penalty.

• Sony cannot assume any responsibilities for any

information leakage that may be caused in

Bluetooth communications.

• Sony cannot accept responsibilities for any

failure to satisfy the protection requirements

resulting from a non-recommended

modification or use of the product.

• For customer support information, please refer

to the operating instructions of your printer.

P Cautions

• Radio waves from a Bluetooth device may

adversely affect the operations of electrical

and medical devices, and could lead to

accidents due to malfunctions. Make sure to

turn off the product and mobile phone and do

not use this product in the following places:

- Inside the medical facilities, trains,

airplanes, gas stations or other places

that may emit flammable gas.

- near automatic doors or fire alarms or

other automatically controlled devices.

• Keep this product at least 22 cm away from

cardiac pacemakers. Radio waves from this

product may adversely affect the operation of

cardiac pacemakers.

• Do not disassemble or modify this product.

Doing so could result in injury, electric shock,

or fire.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 71 72

Comments to this Manuals

No comments