Sony RM-AV3000 User Manual download pdf (Page 51)

51

5 Press and hold down the button

of the remote control until you

hear a beep.

(If you release the button before you

hear a beep, the signal may not be

learned correctly.)

While receiving the signal, “LEARN”

stays lit.

If “NG” flashes on the display and

“NG” sound is heard five times

Learning did not succeed. Try Steps 4 and

5 again.

6 Press COMMANDER OFF.

Note

You cannot program a remote control signal for

a SYSTEM CONTROL button or a Label key by

“learning” for which the System Control

function have been programmed. If you want to

program a remote control signal for that button,

clear programmed commands first (page 35).

COMMANDER

OFF

To clear the learned remote

control signal

1 While pressing COMMANDER OFF,

press MUTING.

2 Press the LEARN key.

“LEARN” appears on the Mode

Display key.

3 While pressing the DEL key, press the

SYSTEM CONTROL button or the

Label key of which learned signals are

to be cleared.

The learned signals are cleared.

4 Press COMMANDER OFF.

If you want to program a new signal for

that button, follow Steps 4 to 6 in the left

column.

If you keep COMMANDER OFF

pressed for more than 2 seconds

The Commander turns off.

If you keep COMMANDER OFF

pressed for less than 2 seconds

The Commander returns to the

previous setting mode.

Continued

1 ... 50 51 52 ... 104

Comments to this Manuals

No comments