Sony MHC-RX90 User Manual download pdf (Page 45)

45

There is severe hum or noise.

•A TV or VCR is placed too close to the

stereo system. Move the stereo system

away from the TV or VCR.

The sound from the connected source is

distorted.

•If “VIDEO” appears in the display when

you press FUNCTION, switch the display

to “MD” (see “Notes: Connecting a

VCR”).

“0:00” flashes in the display.

•A power interruption occurred. Set the

clock and timer settings again.

The timer does not function.

•Set the clock correctly.

DAILY1, DAILY 2, and REC do not appear

when you press the TIMER SELECT button.

•Set the timer correctly.

•Set the clock.

The remote does not function.

•There is an obstacle between the remote

and the system.

•The remote is not pointing in the

direction of the system’s sensor.

•The batteries have run down. Replace the

batteries.

There is acoustic feedback.

•Decrease the volume level.

•Move the microphone away form the

speakers or change the direction of the

microphone.

The colour irregularity on a TV screen

persists.

•Turn off the TV set once, then turn it on

after 15 to 30 minutes. If the colour

irregularity still persists, place the

spearkers farther away from the TV set.

Speakers

Sound comes from one channel or

unbalanced left and right volume.

•Check the speaker connection and

speaker placement.

There is no sound from the surround

speakers.

•Press SONIC FORMATION to select a

mode other than “FRONT ONLY”.

There is no sound from the front speakers.

•Press SONIC FORMATION to select a

mode other than “WHISPER”.

CD Player

The CD tray does not close.

•The CD is not placed properly.

The CD will not play.

•The CD is not lying flat in the disc tray.

•The CD is dirty.

•The CD is inserted label side down.

•Moisture condensation has built up.

Remove the CD and leave the system

turned on for about an hour until the

moisture evaporates.

Play does not start from the first track.

•The player is in programme or shuffle

mode. Press PLAY MODE repeatedly

until “PROGRAM” or “SHUFFLE”

disappear.

“OVER” is displayed.

•You have reached the end of the CD.

Press and hold 0 to return.

continued

1 ... 44 45 46 47 48 49 50

Comments to this Manuals

No comments