Sony MDS-JA555ES User Manual download pdf (Page 17)

Recording on MDs

Marking Track Numbers While

Recording (Track Marking)

You can mark track numbers either manually or

automatically. By marking track numbers at specific

points, you can quickly locate the points later using the

AMS Function, or use various Editing Functions.

Marking track numbers manually

(Manual Track Marking)

You can mark track numbers at any time while

recording on an MD.

Press r REC at the place you want to add a track mark

while recording.

Marking track numbers automatically

(Automatic Track Marking)

The deck adds track marks differently in the following

cases:

• When recording from CDs or MDs with the INPUT

set at OPT1, OPT2 or COAX:

The deck marks track numbers automatically.

However, the Automatic Track Marking Function

may not activate when recording from some CD

players and multi disc players.

• In all other cases:

If “T.Mark LSyn” is selected in Setup Menu 02, the

deck marks a new track number whenever the signal

drops to the specified level or below for about

1.5 seconds or longer, then rises to a specified level.

To select “T.Mark Off” or “T.Mark LSyn” in Setup

Menu 02, do the procedure below:

1 While the deck is stopped, press MENU/NO

twice to display “Setup Menu”.

2 Turn AMS to select “Setup 02”, then press AMS.

3 Turn AMS to select “T.Mark Off” or “T.Mark

LSyn”, then press AMS.

“L.SYNC” lights up when you select “T.Mark

LSyn”.

4 Press MENU/NO.

z You can set the reference level that must pass

before a rise marks a new track number

In Automatic Track Marking, the input signal must

remain at or below a given reference level for

1.5 seconds or longer before a rise above the reference

level will mark a new track number.

Do the following procedure to specify the reference

level. Note that “T.Mark LSyn” should be selected in

Setup Menu 02.

1 While the deck is stopped, press MENU/NO twice to

display “Setup Menu”.

2 Turn AMS to select “Setup 03”, then press AMS.

3 Turn AMS to set the reference level.

You can set the reference level at –72 dB to 0 dB in

2 dB steps.

4 After selecting the reference level, press AMS.

5 Press MENU/NO.

Note

If you turn off the deck or disconnect the AC power cord, the

deck will recall the last settings of the Automatic Track

Marking Function (“T.Mark LSyn” or “T.Mark Off”) the next

time you turn on the deck.

~≠ AMS ±MENU/NO

(

r REC

1 ... 16 17 18 ... 108

Comments to this Manuals

No comments

Sony MDS-JA555ES User Manual Page 17

Comments to this Manuals

Related products and manuals for Cassette players Sony MDS-JA555ES