Sony XAV-AX100 User Manual download pdf (Page 14)

14GB

Touch Panel Adjust

Adjusts the touch panel calibration if the

touching position does not correspond with the

proper item.

Camera Input

Selects the image from the rear view camera:

[OFF], [Normal], [Reverse] (mirror image).

Steering Control

Selects the input mode for the connected remote

control. To prevent a malfunction, be sure to

match the input mode with the connected

remote control before use.

Custom

Input mode for the steering wheel remote

control (follow the procedures of [Steering

Control Custom] to register functions on the

connected remote control).

Preset

Input mode for the wired remote control

excluding the steering wheel remote control.

Steering Control Custom

The steering button panel appears.

 Press and hold the button you want to assign

to the steering wheel.

The button on the panel lights up (standby).

 Press and hold the button on the steering

wheel you want to assign the function to.

The button on the panel will change the color

(highlighted or encircled by an orange line).

 To register other functions, repeat steps 

and .

(Available only when [Steering Control] is set to

[Custom].)

Notes

• While making settings, the connected remote control

cannot be used even though some functions have

already been registered. Use the buttons on the unit.

• If an error occurs while registering, all the registered

information is cleared. Restart registration from the

beginning.

• This function may not be available on some vehicles.

For details on the compatibility of your vehicle, visit the

support site on the back cover.

Bluetooth Connection

Activates the BLUETOOTH signal: [OFF], [ON],

[Pairing] (enters into pairing standby mode).

Bluetooth Device Info

Displays the information of the device connected

to the unit.

(Available only when [Bluetooth Connection] is

set to [ON] and a BLUETOOTH device is

connected to the unit.)

Bluetooth Reset

Initializes all BLUETOOTH-related settings such as

pairing information, call history, history of

connected BLUETOOTH devices, etc.

Rear View Camera Setting

Adjusts the length and/or position of the marker

lines on the picture from the rear view camera by

touching the arrow marks.

Factory Reset

Initializes all the settings to the factory settings.

Firmware Version

Updates and confirms the firmware version.

Open Source Licenses

Displays the software licenses.

Sound Settings

EXTRA BASS

Reinforces bass sound in synchronization with

the volume level: [OFF], [1], [2].

EQ10/Subwoofer

Selects an equalizer curve and adjusts the

subwoofer level.

EQ10

Selects the equalizer curve: [Bollywood], [R&B],

[Rock], [Pop], [Dance], [Hip-Hop], [Electronica],

[Jazz], [Regueton], [Custom], [OFF].

[Custom] adjusts the equalizer curve: –6 to +6.

Subwoofer

Adjusts the volume level of the subwoofer:

[OFF], –10 to +10.

Balance/Fader

Adjusts the balance/fader level.

Balance

Adjusts the sound balance between the left and

right speakers: L15 to R15.

Fader

Adjusts the sound balance between the front

and rear speakers: Front 15 to Rear 15.

Crossover

Adjusts the cut-off frequency and subwoofer

phase.

High Pass Filter

Selects the cut-off frequency of the front/rear

speakers: [50Hz], [60Hz], [80Hz], [100Hz],

[120Hz], [OFF].

Low Pass Filter

Selects the cut-off frequency of the subwoofer:

[50Hz], [60Hz], [80Hz], [100Hz], [120Hz].

Subwoofer Phase

Selects the subwoofer phase: [Normal],

[Reverse].

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Comments to this Manuals

No comments

Sony XAV-AX100 User Manual Page 14

Comments to this Manuals

Related products and manuals for Car media receivers Sony XAV-AX100