Sony HVR-A1N User Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 128
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
19
Getting Started
HVR-A1U/A1N 2-639-667-11(1)
Step 8: Installing the supplied microphone and
hood with lens cover
Installing the supplied
microphone
Install the supplied XLR adaptor and
microphone. You can receive the desired
audio quality.
1 Attach the XLR adaptor to the
accessory shoe on the camcorder
and tighten the screw of the XLR
adaptor.
2 Connect the plug of the XLR
adaptor to the Active Interface
Shoe of the camcorder.
3 Attach the wind screen to the
microphone .
4 Loosen the microphone holder
screw and open the cover.
5 Place the microphone into the
holder with the model name
(ECM-NV1) facing upward, close
the cover, and tighten the screw.
6 Connect the plug of the
microphone to the INPUT1
connector .
7 Set the INPUT LEVEL selector to
MIC or MIC ATT.
When the selector is set to MIC ATT,
you can reduce the volume by about
20dB.
Set the +48V switch to ON.
Continued
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 127 128

Comments to this Manuals

No comments