Sony HXCU-D70 User Manual

HD Camera Control UnitOperating InstructionsBefore operating the unit, please read this manual thoroughly and retain it for future reference.HXCU-D704

10Locations and Functions of Partse PANEL ACTIVE buttonActivates the control panel to control the camera connected to the CCU (panel active state). Wh

11Locations and Functions of Partsq CUSTOM (custom volume) knobControls the function assigned to the knob on the <FRONT PANEL 1> page in the CCU

12Locations and Functions of PartsRear Panela “Memory Stick” slotFor service use only.b LAN jack (RJ-45, 8-pin)Connects to a LAN hub (10BASE-T/100BAS

13Locations and Functions of Partso PIX (picture monitor output) connector (BNC type)Outputs a video signal for a picture monitor. It can also output

14Status DisplayStatus DisplayThe CCU system status can be monitored using a picture monitor connected to the PIX output.For information on monitoring

15Status DisplaySystem statusThe camera model name and signal format are displayed at the top of the page (a “-” mark is displayed instead when a came

16Status DisplayPage 2CNS Mode: REMOTE and LAN connectors mode settingCCU No.: CCU number settingPage 3IP Address: CCU IP address settingSubnet Mask:

17Setup MenuSetup MenuThe CCU system and peripheral settings can be checked and modified using a picture monitor connected to the PIX output.Changing

18Setup MenuTo enter a character stringSome menu items require a character string input.Moving the pointer (,) to an item with a character string inpu

19Setup MenuMenu TreeSYSTEM OPERATION menu CCU CONFIGURATION menuOUTPUT SELECT OUTPUT PIX GENLOCK PHASE REFERENCE GENLOCK H STEP COARSE SC PHA

2Owner’s RecordThe model and serial numbers are located at the rear.Record these numbers in the spaces provided below. Refer to them whenever you call

20Setup MenuNETWORK SETTINGS menuDISPLAY MESSAGE ALARM JUMP MASTER GAIN ECS/SHUTTER ND FILTER IRIS EXTENDER DATE DATE/TIME TIME ZONE OTHERS REA

21Setup MenuMenu ListThe following conventions are used in the menu list table.Settings column values (e.g. ON, OFF, 0): Default settingsExecute by EN

22Setup Menu<OUTPUT FORMAT>S04SLOT NO1-1&2 When CAMERA FORMAT is 1080/59.94i: 1080/59.94i, 525/59.94iWhen CAMERA FORMAT is 720/59.94P: 720/5

23Setup MenuCCU CONFIGURATION menuCCU CONFIGURATIONPage namePage No.Item Settings Description<COLOR BAR>C01HD BARSEL BAR 16:9 (100%), BAR 16:9 (

24Setup Menu<MONITOR 2>C04LEVEL GATE ---, 1&2, 1, 2, OFF 1&2: Displays level gate 1&2 1: Displays level gate 12: Displays level gate

25Setup Menu<FRONT INCOM>C07(MIC ON), (MIC OFF), (PGM ON) CCU front panel MIC/PGM switch position (display only)(PROD), (ENG) CCU front panel IN

26Setup Menu<MENU SETTINGS>C10RESUME ON, OFF In menu mode, resume display of previously displayed page functionRE DIRECTION CONTROL knob operati

27Setup Menu<FRONT PANEL 1>C14ASSIGNABLE/CUSTOMSW1 NOT ASSIGN, GAMMA OFF, HD DTL OFF, SD DTL OFF, BLK GAMMA, KNEE OFF, AUTO KNEE, 5600K, CAM POW

28Setup Menu<FRONT PANEL 2>C15VOLUME REL COEFFIRIS 1/1, 1/2, 1/4 Relative coefficient when the IRIS knob is set to relative value mode1/1: Varia

29Setup MenuNETWORK SETTINGS menu<FRONT PANEL 3>C16(LOCK TARGET) AWB: ON, OFFABB: ON, OFFATW : ON, OFFBARS: ON, OFFCALL: ON, OFFPANEL: ON, OFFA-

3For the customers in EuropeThe manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan.The Authorized Representative f

30Setup Menu<CNS SETTINGS>N03CNS MODE LEGACY, BRIDGE Network connection mode selectionLEGACY: External controller connected using CCA-5 cable on

31AppendixAppendixNotes on UseUse and storage locationsAvoid using or storing the unit in the following places:• Where it is subject to extremes of te

32AppendixSpecificationsHXCU-D70CCU: AT NG Front AT board power supply, PLD errorCCU:RX WARNING Transmission losses between camera and CCU or disappro

33AppendixDesign and specifications are subject to change without notice.Pin assignmentINTERCOM* When the signal is unbalanced, connect the GND signal

34AppendixTRUNK22 R-TALLY OUT OPEN COLLECTOR (Max. 30 mA)23 G-TALLY OUT24 G TALLY (X) IN ON: SHORTOFF: OPEN25 G TALLY (G) INNo. Signal Specifications1

Sony CorporationPrinted in Japan

4Wenn Sie Fragen zur Verwendung von Netzkabel/Geräteanschluss/Stecker haben, wenden Sie sich bitte an qualifiziertes Kundendienstpersonal.Für Kunden i

5Table of ContentsTable of ContentsOverview ... 6Features ...

6OverviewOverviewThe HXCU-D70 Camera Control Unit (CCU) connects to the Sony HXC-D70 HD Color Camera. It performs signal processing, provides an inter

7OverviewSystem Configuration ExampleUsing the CD-ROM ManualThe supplied CD-ROM includes versions of the operating instructions for the HXCU-D70 in Ja

8PreparationsPreparationsArea SettingsBefore using the unitThere is no default area setting. Set the area where you intend to use this unit first.Sett

9Locations and Functions of PartsLocations and Functions of PartsFront Panela Tally lightTurns on red to indicate a red tally signal is being received