Sony HDC-F950 User Manual download pdf (Page 113)

Chapter 4 Adjustments and Settings for Recording

Chapter 4 Adjustments and Settings for Recording 4-19(E)

SAFETY Set the safety marker for the selected

aspect mode.

a) The DISPLAY/ASPECT switch on the viewfinder

allows you to display or not to display all markers

when MARKER is set to ON regardless of the setting

of the CENTER, SAFETY ZONE, EFFECT and

ASPECT MODE on this page.

3 Perform the desired settings for each item.

1 Turn the MENU SEL knob/ENTER button to

move the arrow marker (c) to the item you

want to set, then press the MENU SEL knob/

ENTER button.

The arrow marker (c) changes to a question

mark (?).

2 Turn the MENU SEL knob/ENTER button to

select the desired setting, then press the MENU

SEL knob/ENTER button.

The “?” mark changes back to the arrow marker

(c).

When you perform ON/OFF setting for an item,

and when value selection for that item is required,

select the value and register it in the same manner.

4 Repeat step 3, to make other settings as required.

5 When the menu operation is completed, set the

DISPLAY switch to ON.

The menu display disappears from the viewfinder

screen, and the display indicating the current status of

the camera appears along the top and bottom of the

screen.

4-6-4 Setting Gain Values for the

GAIN Switch Positions

You can set the video amplifier gains corresponding to

the L, M, and H positions of the GAIN switch. Use the

GAIN SW page of the OPERATION menu to make

these settings.

Proceed as follows:

1 Set the DISPLAY switch to MENU.

<GAIN SW> 5

LOW :

0 dB

MIDDLE: 6 dB

HIGH : 12 dB

2 Rotate the MENU SEL knob/ENTER button to

display the GAIN SW page, and push the MENU

SEL knob/ENTER button.

GAIN SW page

The current setting of each item appears to the

right of the item.

Item Contents

LOW Sets the gain value selected when the

GAIN switch is set to L.

MIDDLE Sets the gain value selected when the

GAIN switch is set to M.

HIGH Sets the gain value selected when the

GAIN switch is set to H.

3 Rotate the MENU SEL knob/ENTER button to

align the arrow marker (c) with the item to be

changed, and push the MENU SEL knob/ENTER

button.

The arrow marker (c) will change into a “?” mark.

4 Rotate the MENU SEL knob/ENTER button to

change the setting to the desired value, and push

the MENU SEL knob/ENTER button.

The “?” mark will change back to the arrow

marker (c), and the new setting will be saved.

The gain values for L, M, and H may be set to any

of the following values: –3, 0, 3, 6,or 12 dB.

To set the gain value for another switch position,

return to step 3.

5 To end menu operations, set the DISPLAY switch

to ON.

The menu display disappears from the viewfinder

screen, and the display indicating the current status of

the camera appears along the top and bottom of the

screen.

1 ... 112 113 114 ... 130

Comments to this Manuals

No comments

Sony HDC-F950 User Manual Page 113

Comments to this Manuals

Related products and manuals for Camcorders Sony HDC-F950