Sony DCR-TRV240E User Manual download pdf (Page 235)

235

Troubleshooting Problemen oplossen

Types of trouble and how to correct trouble

Symptom Cause and/or Corrective Actions

• If 10 minutes elapse after you set the POWER switch to

CAMERA or DEMO MODE is set to ON in the menu settings

without a cassette inserted, your camcorder automatically

starts the demonstration.

c Insert a cassette and the demonstration stops.

You can also cancel DEMO MODE (p. 137).

• NIGHTSHOT is set to ON.

c Set it to OFF (p. 38).

• NIGHTSHOT is set to ON in a bright place.

c Set it to OFF (p. 38).

• The backlight function is active.

c Set it off (p. 37).

• BEEP is set to OFF in the menu settings.

c Set it to MELODY or NORMAL (p. 137).

• Set STEADYSHOT to OFF in the menu setting (p. 137).

• The power of the external flash is off or the power source does

not installed.

c Turn on the external flash or install the power source.

• Two or more external flashes are attached.

c Only one external flash can be attached.

• AUTO is selected in FLASH MODE in the menu settings while

recording in a bright place.

c Set it to ON (p. 137).

(continued on the following page)

An unknown picture is displayed on

the screen.

The picture is recorded in incorrect or

unnatural colours.

Picture appears too bright, and the

subject does not appear on the

screen.

The shutter does not sound.

A horizontal black band appears

when shooting a TV screen or a

computer screen.

An external flash (optional) does not

work.

1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 287 288

No comments

Sony DCR-TRV240E User Manual Page 235