Sony DCR-HC28 User Manual

2-891-370-11(1)© 2006 Sony CorporationDigital Video Camera RecorderOperating GuideDCR-HC28Getting Started 11Recording/Playback22Using the Menu 34Dubbi

10Using your camcorder abroad ...64Usable cassette tapes ...

11Getting StartedGetting StartedStep 1: Checking supplied itemsMake sure that you have following items supplied with your camcorder.The number in the

12Step 2: Charging the battery packYou can charge the “InfoLITHIUM” battery pack (P series/H series) (p. 66) after attaching it to your camcorder.1 Al

13Getting Started5 The CHG (charge) lamp turns off when the battery is fully charged. Disconnect the AC Adaptor from the DC IN jack.Disconnect the AC

14Playing timeApproximate time (min.) available when you use a fully charged battery pack.On the battery pack• Before changing the battery pack, slide

15Getting StartedStep 3: Turning the power on and holding your camcorder firmly To record or play back, slide the POWER switch repeatedly to turn on t

16Step 4: Adjusting the LCD panel and viewfinderOpen the LCD panel 90 degrees to the camcorder (1), then rotate it to the best angle to record or play

17Getting StartedStep 5: Using the touch panelYou can play back recorded pictures (p. 25), or change the settings (p. 34) using the touch panel.Place

183 Touch the area including the indicator that you want to check.The meanings of the indicators in the area are listed on the screen. If you cannot f

19Getting StartedStep 6: Setting the date and timeSet the date and time when using this camcorder for the first time. If you do not set the date and t

2To reduce fire or shock hazard, do not expose the unit to rain or moisture.This symbol is intended to alert the user to the presence of uninsulated “

20Step 7: Inserting a CassetteYou can use mini DV cassettes only (p. 65).• The recordable time varies depending on [REC MODE] (p. 46).1 Slide and ho

21Getting Started

22Recording/PlaybackEasy Recording/Playback (Easy Handycam)1 Slide the POWER switch A in the direction of the arrow repeatedly to turn on the CAMERA l

23Recording/PlaybackSlide the POWER switch A in the direction of the arrow repeatedly to turn on the PLAY/EDIT lamp. Touch the buttons on the screen D

24Recording1 Slide the POWER switch in the direction of the arrow repeatedly to turn on the CAMERA lamp.2 Press REC START/STOP to start recording.To s

25Recording/PlaybackPlayback1 Slide the POWER switch in the direction of the arrow repeatedly to turn on the PLAY/EDIT lamp.2 Start playing back.Touch

26Functions used for recording/playback, etc.To use zoom... 1Move the power zoom lever 1 slightly for a slower zoom. Move it f

27Recording/PlaybackTo adjust the focus for an off center subject (SPOT FOCUS) ... 0See [SPOT FOCUS] on page 36.To fix the exposure for the

28Indicators displayed during recording/playbackA Remaining battery (approx.)B Recording mode (SP or LP) (46)C Recording status ([STBY] (standby) or [

29Recording/PlaybackYou can use [DISP GUIDE] (p. 17) to check the function of each indicator that appears on the LCD screen.• Some of the indicators m

3IMPORTANT SAFEGUARDSFor your protection, please read these safety instructions completely before operating the appliance, and keep this manual for fu

30Searching for the starting pointMake sure that the CAMERA lamp lights up (p. 24).[END SCH] (END SEARCH) will not work once you eject the cassette af

31Recording/PlaybackYou can view a few seconds of the scene recorded just before you stopped the tape.1 Touch t [PAGE1] t [MENU].2 Select (CAMERA S

32Playing the picture on a TVYou can connect your camcorder to the input jack of a TV or a VCR using the A/V connecting cable (1) or the A/V connectin

33Recording/Playback

34Using the MenuUsing the menu itemsFollow the instructions below to use each of the menu items listed after this page.1 Slide the POWER switch in the

35Using the Menux To use menu items during Easy Handycam operation1 Touch .2 Select the desired menu.Touch [MENU] then select the desired menu.3 Chang

36Operation button itemsAvailable operation buttons vary depending on the position of the lamp and the display (PAGE).The default settings are marked

37Using the MenuTo return the setting to automatic exposure, touch [ AUTO] or set [EXPOSURE] to [ AUTO].• If you set [SPOT METER], [EXPOSURE] is aut

38You can fix the brightness of a picture manually. Adjust the brightness when the subject is much brighter or darker than the background.1 Touch [MAN

39Using the MenuYou can adjust the brightness of the LCD screen. The recorded picture will not be affected by this operation.Adjust the brightness wit

4LightningFor added protection for this set during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it fro

40[PAGE3]You can play back in various modes while viewing movies.1 Touch the following buttons during playback.2 Touch [ RET.] t .To return to the no

41Using the Menu* The value set before Easy Handycam operation will be retained during Easy Handycam operation.Menu items• Available menu items (z) va

42MANUAL SET menu– PROGRAM AE/P EFFECT, etc.The default settings are marked with B.The indicators in parentheses appear when the items are selected.Se

43Using the MenuSEPIAPictures appear in sepia.B&WPictures appear in black and white.SOLARIZEPictures appear as an illustration with strong contras

44You can record a picture in a ratio suitable for the screen on which it will be displayed.Refer also to the operating instructions supplied with you

45Using the MenuVCR SET menu– AUDIO MIXSee page 34 for details on selecting menu items.See page 52.LCD/VF SET menu– LCD B.L./LCD COLOR/VF B.L., etcThe

46You can adjust the brightness of the viewfinder. The recorded picture will not be affected by this operation.B BRT NORMALStandard brightness.BRIGHTB

47Using the MenuSETUP MENU menu– CLOCK SET/LANGUAGE, etc.See page 34 for details on selecting menu items.See page 19.You can select the language to be

48Dubbing/EditingDubbing to VCR/DVD device, etc.You can copy the picture played back on your camcorder to other recording devices (VCR/DVD device, etc

49Dubbing/Editing1 Prepare your camcorder for playback.Insert the recorded cassette.Slide the POWER switch repeatedly to turn on the PLAY/EDIT lamp.2

5Read this firstBefore operating the unit, please read this manual thoroughly, and retain it for future reference.Replace the battery with the specifi

50Recording pictures from a TV or VCR/DVD device, etc.Using an i.LINK cable (optional), you can record pictures or TV programs from a TV or VCR/DVD de

51Dubbing/Editing6 Touch [REC START] at the point you want to start recording.7 Stop recording.Touch (Stop) or [REC PAUSE].8 Touch [ RET.] t .Dubbi

52Insert a recorded cassette into your camcorder beforehand.1 Slide the POWER switch repeatedly to turn on the PLAY/EDIT lamp.2 Touch (Play/Pause) t

53Dubbing/EditingJacks to connect external devicesOpen the jack cover.A DV Interface (i.LINK) (p. 48, 50)B A/V (audio/video) OUT jack (p. 32, 48)C DC

54TroubleshootingTroubleshootingIf you run into any problems using your camcorder, use the following table to troubleshoot the problem. If the problem

55TroubleshootingThe CHG (charge) lamp flashes while the battery pack is being charged.• Attach the battery pack to the camcorder correctly (p. 12). I

56The picture remains on the LCD screen.• This occurs if you disconnect the DC plug from your camcorder or remove the battery pack without turning off

57TroubleshootingRefer also to “Adjusting the image during recording” (p. 57).The tape does not start when you press REC START/STOP.• Slide the POWER

58A vertical band appears when recording candlelight or electric light in the dark.• This occurs when the contrast between the subject and the backgro

59TroubleshootingThe sound breaks off.• Clean the head using the cleaning cassette (optional) (p. 69).“---” is displayed on the screen.• The tape you

6However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to ra

60Time code and other information appear on the display of the connected device.• Set [DISP OUT] to [LCD] while connected with an A/V connecting cable

61TroubleshootingWarning indicators and messagesIf indicators appear on the LCD screen or in the viewfinder, check the following.Some symptoms you can

62If messages appear on the screen, follow the instructions.x Battery/PowerUse the “InfoLITHIUM” battery pack. (p. 66)Battery level is low.• Change th

63TroubleshootingInvalid during Easy Handycam operation. (p. 23)HDV recorded tape. Cannot playback.• Your camcorder cannot play back this format. Play

64Additional InformationUsing your camcorder abroadPower supplyYou can use your camcorder in any country/region using the AC Adaptor supplied with you

65Additional InformationUsable cassette tapesYou can use mini DV format cassettes only.Use a cassette with the mark.Your camcorder is not compatible

66About the “InfoLITHIUM” battery packThis unit is compatible with an “InfoLITHIUM” battery pack (P series/Hseries).Your camcorder operates only with

67Additional InformationAbout battery life• Battery capacity decreases over time and through repeated use. If decreased usage time between charges bec

68The baud rate is listed under “Specifications” in the operating instructions of each piece of equipment. It is also indicated near the i.LINK interf

69Additional Information• If the battery electrolytic liquid has leaked,– consult your local authorized Sony service facility.– wash off any liquid th

7• The LCD screen and the viewfinder are manufactured using extremely high-precision technology, so over 99.99% of the pixels are operational for effe

70• The video heads will wear after long use. If you cannot obtain a clear image even after using a cleaning cassette (optional), it might be because

71Additional InformationOn charging the pre-installed rechargeable batteryYour camcorder has a pre-installed rechargeable battery to retain the date,

72Color temperature[AUTO], [ONE PUSH], [INDOOR] (3 200 K), [OUTDOOR] (5 800 K)Minimum illumination5 lx (lux) (F 1.8)0 lx (lux) (during NightShot plus

73Additional InformationRechargeable battery pack (NP-FP30)Maximum output voltageDC 8.4 VOutput voltageDC 7.2 VCapacity3.6 Wh (500 mAh)Dimensions (app

74IndexNumeric12BIT...4616BIT...4616:9 WIDE ...444:3...

75Additional InformationLCD COLOR...45LCD panel...16LCD screen...16LCD/VF SET m

76VV SPD PLAY (Various speed playback)...40VCR SET menu...45VF B.L. (Viewfinder back light) ...46Video head...

77Spanish Quick Guide/Guía rápida en españolSpanish Quick Guide/Guía rápida en españolPaso 1: Comprobación de los elementos suministradosAsegúrese de

78Paso 2: Carga de la bateríaPara cargar la batería “InfoLITHIUM” (serie P/serie H), conéctela a la videocámara.1 Alinee los terminales de la batería

79Spanish Quick Guide/Guía rápida en español5 El indicador CHG (carga) se apaga cuando la batería está completamente cargada. Desconecte el adaptador

8Table of ContentsIMPORTANT SAFEGUARDS ... 3Read this first ...

80• Todo el tiempo calculado en las siguientes condiciones:Parte superior: Grabación con pantalla LCD.Parte inferior: Grabación con el visor mientras

81Spanish Quick Guide/Guía rápida en españolPaso 3: Encendido y sujeción de la videocámara con firmeza Para grabar o reproducir, deslice varias veces

82Paso 4: Ajuste del panel LCD y el visorAbra el panel LCD a 90 grados con respecto a la videocámara (1), luego gírelo hacia el mejor ángulo para grab

83Spanish Quick Guide/Guía rápida en españolPaso 5: Uso del panel sensible al tactoPuede reproducir imágenes grabadas o cambiar los ajustes con el pan

843 Toque el área que incluye el indicador que desea comprobar.Los significados de los indicadores del área se muestran en la pantalla. Si no puede en

85Spanish Quick Guide/Guía rápida en españolPaso 6: Ajuste de la fecha y la horaAjuste la fecha y la hora cuando use la videocámara por primera vez. D

86Paso 7: Inserción de un videocaseteSolamente puede utilizar videocasetes mini DV .• El tiempo disponible para grabación varía en función del [MOD GR

87Spanish Quick Guide/Guía rápida en españolGrabación1 Deslice el interruptor POWER varias veces en el sentido de la flecha para que se encienda el in

88Reproducción1 Deslice el indicador POWER en el sentido de la flecha varias veces para encender el indicador PLAY/EDIT.2 Inicie la reproducción.Toque

9Reviewing the most recently recorded scenes (Rec review) ... 31Playing the picture on a TV ...

http://www.sony.net/Printed in JapanAdditional information on this product and answers to frequently asked questions can be found at our Customer Supp