Sony BDV-IZ1000W User Manual download pdf (Page 18)

Getting Started

For assembling the speakers, refer to “Speaker Installation Guide” (supplement).

To connect speaker cords to the center speaker and subwoofer (BDV-

IZ1000W only)

Speaker terminals are located on the rear of the speakers.

Caution

• Contact a screw shop or installer regarding the wall material or screws to be used.

• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach

the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where

reinforcement is applied.

• Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or

improper screw installation, natural calamity, etc.

To install the speakers on a wall

Before installing the speakers on a wall, connect the speaker cord to the speaker.

Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with

the colored tube to 3, and the speaker cord without the colored tube to #.

Assembling the speakers

When installing the speakers on a wall

Colored tube

(–)

(+)

Connector

Rear of the subwoofer

Rear of the center speaker

Purple colored tube

Green colored tube

Colored tube

Front left speaker (L): White

Front right speaker (R): Red

Center speaker: Green

Surround left speaker (L): Blue

Surround right speaker (R): Gray

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 87 88

No comments

Sony BDV-IZ1000W User Manual Page 18