Sony HCD-GSX100W User Manual download pdf (Page 39)

Additional Information

masterpage:Right

filename[\\Win-

78\got78\GSX100Wkaihan\DTP\4245586122\424558612MHCGSX100WU2\GB11INF-CEL.fm]

model name1[MHC-GSX100W/MHC-GSX75]

[4-245-586-12(2)] U2/CA2

To save a tape permanently

To prevent a tape from being accidentally recorded

over, break off the cassette tab from side A or B as

illustrated.

If you later want to reuse the tape for recording, cover

the broken tab with adhesive tape.

Before placing a cassette in the tape

deck

Take up any slack in the tape. Otherwise, the tape may

get entangled in the parts of the tape deck and become

damaged.

When using a tape longer than

90 minutes

The tape is very elastic. Do not change the tape

operations such as play, stop, and fast-winding

frequently. The tape may get entangled in the tape

deck.

Cleaning the tape heads

Clean the tape heads after every 10 hours of use.

Be sure to clean the tape heads before you start an

important recording or after playing an old tape.

Use a separately sold dry-type or wet-type cleaning

cassette. For details, refer to the instructions of the

cleaning cassette.

Demagnetising the tape heads

Demagnetise the tape heads and the metal parts that

have contact with the tape after every 20 to 30 hours of

use with a separately sold demagnetising cassette. For

details, refer to the instructions of the demagnetising

cassette.

Main Unit

(HCD-GSX100W/GSX75)

Amplifier section

MHC-GSX100W/GSX75

For the U.S. model

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC

DISTORTION:

With 6-ohm loads, both channels driven, from

120 – 10,000 Hz; rated 200 watts (for

GSX100W), 150 watts (for GSX75) per channel

minimum RMS power, with no more than 10%

total harmonic distortion from 250 milliwatts to

rated output.

MHC-GSX100W

Continuous RMS power output (reference):

200 + 200 W

(6 ohms at 1 kHz, 10%

THD)

Total harmonic distortion less than 0.09% (6 ohms at

1 kHz, 125 W)

MHC-GSX75

Continuous RMS power output (reference):

150 + 150 W

(6 ohms at 1 kHz, 10%

THD)

Total harmonic distortion less than 0.09% (6 ohms at

1kHz, 70 W)

Inputs

VIDEO (MD) IN (phono jacks):

voltage 250/450 mV,

impedance 47 kilohms

AUDIO IN (phono jacks): 450 mV, impedance 47

kilohms

Outputs

VIDEO OUT (phono jacks):

max. output level 1Vp-p,

unbalanced, Sync

negative, load impedance

75 ohms

PHONES (stereo phone jack):

accepts headphones of

8ohms or more

SPEAKER: accepts impedance of 6 to

16 ohms

Break off the

cassette tab

Specifications

continued

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

Comments to this Manuals

No comments

Sony HCD-GSX100W User Manual Page 39

Comments to this Manuals

Related products and manuals for Audio Sony HCD-GSX100W