Sony MHC-RXD6AV Operations Instructions download pdf (Page 40)

40

For the U.S. model

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL

HARMONIC DISTORTION:

With 6 ohm loads, both channels driven, from

70 – 20,000 Hz; rated 60 watts per channel

minimum RMS power, with no more than

0.9% total harmonic distortion from

250 milliwatts to rated output.

Amplifier section

MHC-RXD6AV (North American model):

Front Speaker:

Continuous RMS power output (reference)

70 + 70 watts

(6 ohms at 1 kHz,

10% THD)

Total harmonic distortion less than 0.07%

(6 ohms at 1 kHz, 35 W)

Center Surround Speaker:

Continuous RMS power output (reference)

30 watts

(12 ohms at 1 kHz,

1% THD)

Rear Surround Speaker:

Continuous RMS power output (reference)

15 + 15 watts

(6 ohms at 1 kHz,

1% THD)

MHC-RXD6AV (European model):

Front Speaker:

DIN power output (rated) 50 + 50 watts

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

60 + 60 watts

(6 ohms at 1 kHz,

10% THD)

Music power output (reference)

100 + 100 watts

(6 ohms at 1 kHz,

10% THD)

Specifications

Tuner

Severe hum or noise (“TUNED” or

“STEREO” flashes in the display).

•Adjust the antenna.

•The signal strength is too weak. Connect

the external antenna.

A stereo FM program cannot be received in

stereo.

•Press STEREO/MONO so that

“STEREO” appears.

If other troubles not described

above occur, reset the system as

follows:

1 Unplug the power cord.

2 Plug the power cord back in.

3 Press 1/u.

4 Press p and 1/u at the same time.

The system is reset to the factory settings. All

the settings you made, such as the preset

stations, clock, and timer are cleared. You

should set them again.

Troubleshooting (continued)

1 2 ... 35 36 37 38 39 40 41 42 43 44

Comments to this Manuals

No comments