Sony DMX-P01 User Manual download pdf (Page 38)

38

Miscellaneous

Preparing a Power

Supply

The unit can be powered in the

following two ways:

• Internal batteries

Eight LR6 (size AA) alkaline

batteries can be accommodated in the

battery compartment.

• External battery

A lithium ion battery or nickel metal

hydride battery which is connected to

the DC IN 10 - 15 V connector on

the right panel. The unit is equipped

with two types of DC IN 10 - 15 V

connector, an XLR 4-pin and a DC

jack type connector. Use either one

depending on the external battery

you are using.

Notes

• Do not connect external batteries to

both the 4-pin of the XLR type

connector and the DC jack type

connector at the same time.

Be sure to connect the external

battery to either one.

Connecting external batteries to

both connectors may cause the

deterioration of the external

batteries.

• Do not connect the external battery

other than the BP-90 type battery to

the DC jack type connector,

because the polarity of the DC jack

is different.

When both internal batteries and

an external battery are used

When the power of the unit is turned

on, the power is supplied from the

external battery. Since the unit can be

powered by an external battery while

preserving the life of the internal

batteries, the power supply is switched

from internal batteries if the DC cord

is disconnected accidentally or the

external battery is shut down

suddenly.

Inserting the Batteries

in the Battery

Compartment

1 Pull the battery compartment

toward you by pressing the lock

levers.

2 Open the cover of the battery

compartment by loosening the

screw as illustrated.

Lock levers

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 48 49

Comments to this Manuals

No comments