Sony ICF-C1T User Manual download pdf

ICF-C1T_RU5 [GB/RU] 4-480-528-61(2)

English

Before operating the unit, please read this

guide thoroughly and retain it for future

reference.

WARNING

To reduce the risk of fire, do not cover the

ventilation of the apparatus with newspapers,

tablecloths, curtains, etc. And do not place

lighted candles on the apparatus.

To reduce the risk of fire or electric shock, do

not expose this apparatus to dripping or

splashing, and do not place objects filled with

liquids, such as vases, on the apparatus.

Do not install the appliance in a confined

space, such as a bookcase or built-in cabinet.

Do not expose batteries or apparatus with

battery-installed to excessive heat such as

sunshine, fire or the like.

As the main plug is used to disconnect the unit

from the mains, connect the unit to an easily

accessible AC outlet. Should you notice an

abnormality in the unit, disconnect the main

plug from the AC outlet immediately.

The unit is not disconnected from the AC

power source (mains) as long as it is connected

to the wall outlet, even if the unit itself has

been turned off.

The nameplate and important information

concerning safety are located on the bottom

exterior.

CAUTION

Danger of explosion if battery is incorrectly

replaced. Replace only with the same type.

This symbol is intended to alert the

user to the presence of important

operating and maintenance (servicing)

instructions in the literature

accompanying the appliance.

Disposal of waste batteries and

electrical and electronic equipment

(applicable in the European Union and

other European countries with separate

collection systems)

This symbol on the product, the

battery or on the packaging

indicates that the product and the

battery shall not be treated as

household waste. On certain

batteries this symbol might be used

in combination with a chemical symbol. The

chemical symbols for mercury (Hg) or lead (Pb) are

added if the battery contains more than 0.0005%

mercury or 0.004% lead. By ensuring these

products and batteries are disposed of correctly,

you will help prevent potentially negative

consequences for the environment and human

health which could otherwise be caused by

inappropriate waste handling. The recycling of the

materials will help to conserve natural resources.

In case of products that for safety, performance or

data integrity reasons require a permanent

connection with an incorporated battery, this

battery should be replaced by qualified service

staff only. To ensure that the battery and the

electrical and electronic equipment will be treated

properly, hand over these products at end-of-life to

the applicable collection point for the recycling of

electrical and electronic equipment. For all other

batteries, please view the section on how to

remove the battery from the product safely. Hand

the battery over to the applicable collection point

for the recycling of waste batteries. For more

detailed information about recycling of this product

or battery, please contact your local Civic Office,

your household waste disposal service or the shop

where you purchased the product or battery.

WARNING



Battery may explode if handled incorrectly.

Do not recharge, disassemble or dispose of

in fire.



Dispose of used battery promptly and in

accordance with local environmental laws

and guidelines. Keep away from children.

License and Trademark

Notice

No Power No Problem™ is a trademark of Sony

Corporation.

Precautions



Operate the unit on the power sources

specified in “Specifications.”



To disconnect the power cord (mains lead),

pull it out by the plug, not the cord.



Do not leave the unit in a location near a

heat source, such as a radiator or airduct, or

in a place subject to direct sunlight, excessive

dust, mechanical vibration, or shock.



Allow adequate air circulation to prevent

internal heat build-up. Do not place the unit

on a surface (a rug, blanket, etc.) or near

materials (a curtain) that might block the

ventilation holes.



Should any solid object or liquid fall into the

unit, unplug the unit and have it checked by

a qualified personnel before operating it any

further.



To clean the casing, use a soft dry cloth. Do

not use any type of solvent, such as alcohol

or benzine, which may damage the finish.



Do not connect the antenna lead to the

external antenna.

NOTES ON LITHIUM BATTERY



Dispose of used battery promptly. Keep the

lithium battery out of the reach of children.

Should the battery be swallowed,

immediately consult a doctor.



Wipe the battery with a dry cloth to assure a

good contact.



Be sure to observe the correct polarity when

installing the battery.



Do not hold the battery with metallic

tweezers, otherwise a short-circuit may

occur.



Do not expose the battery to excessive heat

such as direct sunlight, fire or the like.

If you have any questions or problems

concerning your unit, please consult your

nearest Sony dealer.

Getting Started

Connecting to an AC

power source

Connect the AC power cord to a wall outlet.

To wall outlet

About the battery as a

backup power source

This unit needs a CR2032 battery (supplied) as

a backup power source to keep the clock and

the alarm operating during a power

interruption. (No Power No Problem system)

When to replace the

battery

When the battery is discharged, “” appears

on the display.

If a power interruption occurs while the battery

is discharged, the current time and alarm will

be erased.

Installing and replacing

the backup battery

1 Keep the AC plug connected to the

wall outlet and remove the battery

compartment on the bottom of the

unit by pulling it up while sliding the

tab. (See Fig. -.)

2 Insert a new battery into the battery

compartment with the  side facing

up.

To remove the battery from the battery

compartment, push it out from the side

marked PUSH. (See Fig. -.)

3 Insert the battery compartment back

into the unit along the groove and

push it from above until it clicks. (See

Fig. -.)

The tab locks the battery compartment.

4 Press RADIO to remove “



” from the

display.

Notes



When you replace the battery, do not

disconnect the AC plug from the wall outlet.

Otherwise, the current date, current time and

alarm will be erased.



If the unit will be left unplugged for a long

time, remove the battery to avoid any

damage that may be caused by leakage or

corrosion.

Setting the clock

1 Press and hold ENTER/TIME SET for

more than 2 seconds.

You will hear a beep and the last two digits

of the year will start to flash on the display.

2 Press + or – repeatedly to select the

year, and then press ENTER/TIME SET.

3 Repeat step 2 to set the month, day

and time.

After setting the time, two short beeps will

sound and the seconds will start

incrementing from zero.

Note





If you do not press any button for about 1

minute while setting the clock, clock setting

mode will be canceled.

To change the display to

indicate daylight saving time

(summer time)

Change the daylight saving time (summer

time) adjustment setting according to the

following procedure.

Press and hold DST for more than 3

seconds.

“DST” appears on the display and the clock

display switches to daylight saving time

(summer time).

To deactivate the daylight saving time (summer

time) adjustment, press and hold DST for more

than 3 seconds again.

AC power cord

The frequency of the current radio

station is displayed as a rough guide.

Display

There is a tactile dot beside VOLUME + to show the direction to go to turn up the

volume.

Operations

Playing the radio

1 Press RADIO to turn on the radio.

2 Set BAND to the desired band (AM or

FM).

3 Tune to the desired station using

TUNING.

4 Adjust the volume using VOLUME +/–.

To turn off the radio, press ALARM RESET/

OFF.

Setting the alarm

The dual alarm function allows you to set two

alarm programs (ALARM A and ALARM B).

An alarm time can be set for each program and

the alarm sound can be selected from RADIO

(radio) or BUZZ (buzzer).

Before setting the alarm



Make sure to set the clock. (See “Setting the

clock.”)



To set the radio alarm, first tune to a station

and adjust the volume. (See “Playing the

radio.”)

To set the alarm

Set ALARM A (or B) to the desired

alarm sound (RADIO or BUZZ).

When setting ALARM A

The alarm time appears for a few seconds,

and then “A” (or “B”) appears on the display.

(It does not appear when the switch is set

to OFF.)

2 Press SET ALARM TIME + or –

repeatedly to set the desired time

while the alarm time appears on the

display.

While setting the alarm time, “A” (or “B”)

flashes on the display.

When the alarm time setting operation is

complete, the clock display returns after a

few seconds and “A” (or “B”) changes from

flashing to fully lit.

At the set time, the radio will turn on, or the

buzzer will sound gradually increasing in

volume. (“A” (or “B”) flashes on the display.)

To stop the alarm

Press ALARM RESET/OFF to turn off the

alarm.

The alarm will sound again at the same time

the next day.

To doze for a few more minutes

Press SNOOZE/BRIGHTNESS.

The sound turns off, but will automatically

come on again after about 10 minutes.

Each time you press SNOOZE/BRIGHTNESS,

the snooze time changes as follows:

The display shows the snooze time for about

4seconds and returns to show the current

time. (“A” (or “B”) flashes on the display.)

To deactivate the alarm

Set ALARM A (or B) to OFF.

“A” (or “B”) disappears from the display.

Notes



The alarm time setting cannot be changed if

ALARM A (or B) is set to OFF. If SET ALARM

TIME + or – is pressed, “OFF” appears on the

display for about 0.5 seconds.



If a second alarm sounds during a first (or

the snooze function is active), the second

alarm takes priority.



ENTER/TIME SET and DST are unavailable

while the alarm is sounding or the snooze

function is turned on.



If the same alarm time is set for both ALARM

A and ALARM B, ALARM A takes priority.



If no operation is performed while the alarm

is sounding, the alarm will stop after about

60 minutes.

Notes on the alarm in the event of a

power interruption

In the event of a power interruption, the alarm

functions work until the battery is fully

discharged. But certain functions will be

affected as follows:



The display will disappear.



If the alarm sound is set to RADIO, it will be

changed to BUZZ automatically.



If the power returns while the alarm is

sounding, the alarm sounds continuously for

about 60minutes when the power returns.



The alarm buzzes for about one minute,

stops temporarily, and buzzes again after

about five minutes if neither SNOOZE/

BRIGHTNESS nor ALARM RESET/OFF is

pressed while the alarm is buzzing.

If the alarm buzzes and stops (either

automatically after 1 minute or by pressing

SNOOZE/BRIGHTNESS) five times, the alarm

is automatically reset in the case of a power

interruption. The alarm will buzz for

30minutes after power is restored if it is

restored within 60minutes of the alarm time.



If you press SNOOZE/BRIGHTNESS while the

alarm is sounding, the snooze time is set to

10minutes. During a power failure, the

snooze time cannot be set to more than

10minutes.



If “



” appears on the display, the alarm will

not sound in the event of a power

interruption. Replace the battery if “



”

appears.

Setting the sleep

timer

You can fall asleep to the radio using the sleep

timer, which turns off the radio automatically

after a preset duration.

Press SLEEP.

The radio turns on. Each time you press SLEEP,

the duration (in minutes) changes as follows:

The radio will play for the duration you set,

then shut off.

To deactivate the sleep timer, press SLEEP

repeatedly to set the sleep timer to “OFF.”

To turn off the radio before the

preset time

Press ALARM RESET/OFF.

To use both the sleep timer and

alarm

You can fall asleep to the radio and also be

awakened by the radio or buzzer alarm at the

preset time.

Set the alarm, then set the sleep timer.

Note



When the alarm is set to sound during the

sleep timer duration, the sleep timer will be

deactivated automatically when the alarm

sounds.

Setting the brightness

of the display

Three levels of brightness are available.

Press SNOOZE/BRIGHTNESS.

Each time you press SNOOZE/BRIGHTNESS,

the brightness of the display changes as

follows:

Note



When the alarm is sounding or the snooze

function is active, the brightness of the

display cannot be changed.

General information

Troubleshooting

Should any problems persist after you have

made the following checks, consult your

nearest Sony dealer.

The clock flashes “0:00” after a power

interruption.



The battery is discharged. Remove the old

battery and insert a new one.

Unsatisfactory reception



Extend the FM wire antenna fully to increase

reception sensitivity.



Rotate the unit horizontally for optimum

reception. A ferrite bar AM antenna is built

into the unit.



Do not operate the unit over a steel desk or

metal surface, as this may lead to

interference.

The radio or buzzer alarm does not

sound at the preset alarm time.



Check that “A” or “B” appears on the display.

The radio alarm is activated but no

sound is emitted at the preset alarm

time.



Adjust the volume using VOLUME +/–.

Specifications

Time display

24-hour system

Frequency range

Band Frequency

FM 87.5 MHz – 108 MHz

AM 531 kHz – 1,602 kHz

Speaker

Approx. 6.6 cm dia., 8 Ω

Power output

115 mW (at 10% harmonic distortion)

Power requirements

230 V AC, 50 Hz

For power backup: 3 V DC, one CR2032 battery

Dimensions

Approx. 101 mm  102 mm  101 mm (w/h/d)

including projecting parts and controls

Mass

Approx. 490 g including CR2032 battery

Supplied accessories

CR2032 battery (1)

Design and specifications are subject to

change without notice.



  

FM wire antenna

4-480-528-61(2)

ICF-C1T

FM/AM Clock Radio

Operating Instructions

Инструкция по эксплуатации (Переход назад)

1 2

Summary of Contents

Page 1 - FM/AM Clock Radio

ICF-C1T_RU5 [GB/RU] 4-480-528-61(2)EnglishBefore operating the unit, please read this guide thoroughly and retain it for future reference.WARNINGTo re

Page 2 - Общая информация

ICF-C1T_RU5 [GB/RU] 4-480-528-61(2)ПРЕДУПРЕЖДЕНИЕПри неправильном обращении батарейка может взорваться. Не заряжайте, не разбирайте и не бросайте ее