Sony ICD-ST20 User Manual download pdf (Page 58)

Symptom

You cannot erase a

message.

You cannot

add a recording or an

overwrite recording.

Recording is

interrupted.

Noise is heard.

Recording level is

low.

Recording level is

unstable (when

recording music, etc.).

Recording is

interrupted (when

recording from an

external device).

Remedy

•The message or the folder which contains the

message is set to “Read-only“ in the computer.

Display the message using Windows Explorer

and remove the check for “Read-only“ under

“Properties“.

•The remaining memory is too short. The

overwritten part will be deleted after the

overwriting part finishes recording. Therefore,

you can only overwrite within the remaining

recording time.

•At a factory setting, REC-OP is set to OFF.

Display the menu and set the REC-OP to ON

(page 50) .

•The advanced VOR function (page 14) is

activated. Set the VOR to OFF.

•An object, such as your finger, etc., accidentally

rubbed or scratched the unit during recording

so that noise was recorded.

•The unit was placed near an AC power source,

a fluorescent lamp or a mobile phone during

recording or playback.

•Plug of the connected microphone was dirty

when recording. Clean the plug.

•The i (headphones) plug is dirty. Clean the

plug.

•SENS (microphone sensitivity) is set to L.

Display the menu and set SENS to H or M

(page 52).

•This unit is designed to automatically adjust

the recording level when recording meetings,

etc., and is not suitable for music recording.

•If you use a connecting cable without register

to connect the sound source to the IC recorder,

sound may be recorded interrupted. Make

sure to use a registered connecting cable.

Troubleshooting (continued)

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 67 68

Comments to this Manuals

No comments

Sony ICD-ST20 User Manual Page 58

Comments to this Manuals

Related products and manuals for Voice Recorders Sony ICD-ST20