Sony SLV-ED313ME User Manual download pdf (Page 8)

8 Getting Started

SLV-ED313ME GB 3-065-583-11 (1)

RF CHANNEL

PROGRAM

Selected TV system

APC

4 Press RF CHANNEL.

The TV system indicator appears in the display window.

Press PROGRAM +/– to select the correct TV system.

5 Tune the TV to the same channel as

shown in the display window so that

the picture on the right appears on the

TV screen.

Refer to your TV manual for tuning

instructions.

If the picture does not appear clearly,

see “To obtain a clear picture from the

VCR” below.

6 Press RF CHANNEL.

You have now tuned your TV to the VCR. From now on, whenever

you want to play a tape, set the TV to the video channel.

To obtain a clear picture from the VCR

If the picture does not appear clearly in step 5 above, first go to step 6 to

finish this procedure once. Then start from step 2. After pressing RF

CHANNEL twice in step 2 to display the RF channel, press PROGRAM +/–

so that another RF channel appears. Then tune the TV to the new RF channel

until a clear picture appears.

To set another RF channel number on the VCR, select a channel number that

does not receive a broadcast signal in your area and is clear of interference

from other channels.

If you cannot obtain a clear picture after performing this procedure, we

recommend you connect the VCR and TV using the audio/video cable (see

“To a TV that has audio/video input jacks” on page 6). If the same symptom

persists, consult your nearest Sony dealer.

Note

• If you set the wrong TV system, you may have no sound or sound may be distorted

(noisy sound).

SONY VIDEO CASSETTE

RECORDER

Step 4: Tuning your TV to the VCR (continued)

If your TV system is Select

B/G G

D/K K

01GB03GET-ED313.p65 10/1/01, 14:248

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 52 53

Comments to this Manuals

No comments

Sony SLV-ED313ME User Manual Page 8

Comments to this Manuals

Related products and manuals for Video recorders Sony SLV-ED313ME