Sony SRS-XB2 User Manual download pdf

English Personal Audio System

Before operating the system, please read this guide thoroughly and retain it for future reference.

WARNING

To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers,

tablecloths, curtains, etc.

Do not expose the appliance to naked flame sources (for example, lighted candles).

To reduce the risk of fire or electric shock, do not expose the USB AC adaptor to dripping or

splashing, and do not place objects filled with liquids, such as vases, on the USB AC adaptor.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine,

fire or the like for a long time.

As the main plug of the USB AC adaptor is used to disconnect the USB AC adaptor from the mains,

connect it to an easily accessible AC outlet. Should you notice an abnormality in it, disconnect it

from AC outlet immediately.

The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall

outlet, even if the unit itself has been turned off.

The validity of the CE marking is restricted to only those countries where it is legally enforced,

mainly in the countries EEA (European Economic Area).

Disposal of Old Electrical & Electronic Equipment (Applicable in the

European Union and other European countries with separate collection

systems)

Precautions

Note when using with a mobile phone



For details on operation of your mobile phone when receiving a telephone call while transmitting

the sound using the BLUETOOTH connection, refer to the operating instructions supplied with the

mobile phone.

On safety



The nameplate and important information concerning safety are located on the bottom exterior

of the main unit and on the surface of the USB AC adaptor.



Before operating the system, be sure that the operating voltage of the system is identical with

that of your local power supply.

Where purchased Operating voltage

All countries/regions 100 V – 240 V AC, 50 Hz/60 Hz

Notes on the USB AC adaptor



When connecting or disconnecting the USB AC adaptor, turn off the system beforehand.

Otherwise, it may cause malfunction.



Use only the supplied USB AC adaptor and micro-USB cable. To avoid damaging the system, do

not use any other USB AC adaptor.

Polarity of the USB port of the

USB AC adaptor



Plug the USB AC adaptor into a nearby wall outlet (mains). In the case of a problem, unplug it

from the wall outlet (mains) immediately.



Do not install the USB AC adaptor in a confined space, such as a bookcase or built-in cabinet.



To reduce the risk of fire or electric shock, do not expose the USB AC adaptor to dripping or

splashing, and do not place objects filled with liquids, such as vases, on the USB AC adaptor.

On placement



Do not set the speaker in an inclined position.



Do not leave the system in a location near heat sources, or in a place subject to direct sunlight,

excessive dust, moisture, rain or mechanical shock.

On operation



Do not insert any small objects, etc., into the jacks or ventilation hole on the rear of the system.

The system may short out or malfunction.

On cleaning



Do not use alcohol, benzine, or thinner to clean the cabinet.

Others



Two units are required when using the Speaker Add function. Only the SBC codec is supported

while using the Speaker Add function.



If you have any questions or problems concerning this system that are not covered in this

manual, please consult your nearest Sony dealer.

On Copyrights



LDAC™ and LDAC logo are trademarks of Sony Corporation.



The BLUETOOTH® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such

marks by Sony Corporation is under license.



The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in

other countries.



Other trademarks and trade names are those of their respective owners.

Notes on water resistant feature

(Read before using the system)

Water resistant performance of the system

This system has a water resistant specification*

of IPX5*

as specified in “Degrees of protection

against ingress of water” of the IEC60529 “Ingress Protection Rating (IP Code).” However, this

system is not completely water-tight.

Do not drop the system into hot water in a bathtub or purposely use it in water. Depending on

usage, water entering the system may cause fire, electric shock or malfunction.

Use the system with full understanding of the following.

Liquids that the water resistant performance specifications apply to

Applicable : fresh water, tap water, sweat

Not applicable : liquids other than the above (soapy water, water with detergent or

bath agents, shampoo, hot spring water, hot water, pool water,

seawater, etc.)

Requires that the cap is fastened securely.

The supplied accessories are not water resistant.

IPX5 (Degree of protection against jets of water): The system has been tested and found to

remain functional after exposure to direct jet streams of water using a nozzle of 6.3 mm internal

diameter from any direction where approximately 12.5 L/ min of water is applied for a period of

more than 3 minutes from a distance of about 3 meters.

The water resistant performance of the system is based on our measurements under the

conditions herein described. Note that malfunctions as a result of water immersion caused by

misuse by the customer are not covered by the warranty.

To avoid the deterioration of the water resistant performance

Check the following and use the system correctly.



Do not use or leave the system in an extremely hot or cold environment (temperature outside the

range of 5 °C – 35 °C). If the system is used or left in outside the above range, the system may

automatically stop to protect internal circuitry.



Be careful not to drop the system or subject it to mechanical shock. Deformation or damage may

cause deterioration of the water resistant performance.



Do not use the system in a location where large amount of water or hot water may splash on it.

The system does not have a design that is resistant to water pressure. Use of the system in the

above location may cause a malfunction.



Do not pour high-temperature water or blow hot air from a hair dryer or any other appliance on

the system directly. Also, never use the system in high temperature locations such as in saunas or

near a stove.



Handle the cap with care. The cap plays a very important role in maintenance of the water

resistant performance. When using the system, make sure that the cap is closed completely.

When closing the cap, be careful not to allow foreign objects inside. If the cap is not closed

completely the water resistant performance may deteriorate and may cause a malfunction of the

system as a result of water entering the system.

Cap

How to care for the system when wet

If the system gets wet, first remove the water from the system, and then wipe off the moisture on

the system using a soft, dry cloth. Especially in cold regions, leaving moisture on its surface may

cause the system to freeze and malfunction. Be sure to wipe off the moisture after using the

system.

Put the system on towel or dry cloth. Then leave it at room temperature and dry the system until no

moisture remains.

Specifications

Speaker section

Speaker system Approx. 42 mm dia. × 2

Enclosure type Passive radiator model

BLUETOOTH

Communication System

BLUETOOTH Specification version 3.0

Output BLUETOOTH Specification Power Class 2

Maximum communication range

Line of sight approx. 10 m*

Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz)

Modulation method FHSS

Compatible BLUETOOTH Profiles*

A2DP (Advanced Audio Distribution Profile)

AVRCP (Audio Video Remote Control Profile)

HSP (Headset Profile)

HFP (Hands-free Profile)

Supported Codec*

SBC*

, AAC*

, LDAC*

Transmission range (A2DP)

20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)

The actual range will vary depending on factors such as obstacles between devices, magnetic

fields around a microwave oven, static electricity, reception sensitivity, aerial’s performance,

operating system, software application, etc.

BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between

devices.

Codec: Audio signal compression and conversion format

Subband Codec

Advanced Audio Coding

LDAC is an audio coding technology developed by Sony that enables the transmission of

High-Resolution (Hi-Res) Audio content, even over a BLUETOOTH connection. Unlike other

BLUETOOTH compatible coding technologies such as SBC, it operates without any down-

conversion of the Hi-Res Audio content*

, and allows approximately three times more data*

than those other technologies to be transmitted over a BLUETOOTH wireless network with

unprecedented sound quality, by means of efficient coding and optimized packetization.

Excluding DSD format contents.

In comparison with SBC (Subband Coding) when the bitrate of 990kbps (96/48 kHz) or 909kbps

(88.2/44.1 kHz) is selected.

Microphone

Type Electret condenser

Directional characteristic

Omni directional

Effective frequency range

100 Hz - 7,000 Hz

General

Input AUDIO IN jack (ø 3.5 mm stereo mini jack)

Power DC 5 V (using the supplied USB AC adaptor connected to AC 100 V - 240V,

50Hz/60 Hz power supply) or, using built-in lithium-ion battery

Usage life of lithium-ion battery (using the BLUETOOTH connection)

Approx. 12 hours*

Dimensions (including projecting parts and controls)

Approx. 191 mm × 62 mm × 65 mm (w/h/d)

Mass Approx. 480 g including battery

Supplied accessories USB AC adaptor (1)

Micro-USB cable (1)

Operating Instructions (1)

Reference Guide (this document) (1)

Warranty card (1)*

When the specified music source is used and the volume level of the unit is set to 10.

If the volume level of the unit is set to maximum, the usage life will be approx. 3 hours.

Time may vary, depending on the temperature or conditions of use.

The item is not included in some countries/regions.

Design and specifications are subject to change without notice.

Personal Audio System

Reference Guide

SRS-XB2

4-587-045-41(1)

Printed in China

http://www.sony.net/

Personal Audio System 1

Summary of Contents

Page 1 - Personal Audio System

English Personal Audio SystemBefore operating the system, please read this guide thoroughly and retain it for future reference.WARNINGTo reduce the ri

Sony SRS-XB2 User Manual

Browse online or download User Manual for Unknown Sony SRS-XB2. Sony SRS-XB2 Reference guide

Summary of Contents

More documents for Unknown Sony SRS-XB2

Comments to this Manuals

Sony SRS-XB2 User Manual

Browse online or download User Manual for Unknown Sony SRS-XB2. Sony SRS-XB2 Reference guide

Summary of Contents

More documents for Unknown Sony SRS-XB2

Comments to this Manuals

Related products and manuals for Unknown Sony SRS-XB2