Sony NAS-S55HDE User Manual Page 108

  • Download
  • Add to my manuals
  • Print
  • Page
    / 135
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 107
NAS-S55HDE.GB.3-277-228-13(1)
108
GB
Updating the system
application
By downloading the latest version of the system
application, you can take advantage of the newest
functions.
When a new update is available, you will be
notied by a message that appears in the display
while the unit is on and connected to the Internet.
Note
Make sure not to turn o the unit or disconnect the
network cable while the updating operation is in
progress.
1
Enter the Settings menu and select
[Software update].
e system application update display
appears.
2
Follow the displayed instructions.
e updating starts. It may take about an
hour for the unit to nish updating.
Aer the unit nishes updating the
application, it will take about 30 to 40
minutes before the unit restarts.
Formatting the system
is function formats the unit and restores it to
the condition it was in at the time of purchase.
Note that this process deletes all settings and
information (e.g., audio data recorded or
imported in the HDD Jukebox, clock setting
and network setting). However, system updates
performed by [Soware update] are not deleted.
1
Enter the Settings menu and select
[System format].
A conrmation display appears.
2
Select [Yes].
Formatting starts.
e unit automatically restarts several times
during the operation. A few minutes aer
the last restart, the unit turns itself o.
Moving track data between the
unit and other components
You can move track data in the units HDD
Jukebox to other GIGA JUKE systems, or vice
versa. When you move the track data to another
GIGA JUKE system, the track data will be deleted
from the HDD Jukebox in the sender system.
Receiver system
Sender system
Moving track data
HDD
HDD
Please read the following
It may take a while to move track data between
systems. For example, it takes about 20 hours to
move 5,000 tracks
You can stop moving of track data, then resume
moving from the point at which it was stopped.
Even aer a transfer has been stopped, normal
operation will be possible on both systems (the
sender and the receiver).
Notes

When track data has been moved, the track data is
deleted from the sender system.

If you stop a transfer of track data, the track data that
has not been moved remains in the sender system.

Make sure not to turn o or reset the units (the
sender and the receiver) while a data moving is in
progress.

Moving track data is not possible when the receiver
system is an older model than that of the sender
system. Track data can only be moved from an
older model to a newer model, or between the same
models.

e following items cannot be moved.
Playlists of the HDD Jukebox
Settings (e.g., network settings, timer settings.)

Tracks that have been manually moved between
the x-DJ channels in the sender system will be
automatically returned to their original x-DJ
channels in the receiver system.
Page view 107
1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 134 135

Comments to this Manuals

No comments