Sony MAP-S1 User Manual download pdf (Page 16)

Playing a file on a USB

device

You can play audio files stored on a USB

device such as WALKMAN® or digital media

player, on this system by connecting a USB

device to the system.

The  (USB REAR) port on the rear of the unit

can be connected with a computer or

WALKMAN® which is compatible with High-

Resolution Audio.

For details on compatible USB devices, see

“Compatible devices and versions”

(page 43).

Note

 If you play back High-Resolution Audio, use the

device which is compatible with USB2.0 High

Speed cable.

Press FUNCTION to select “USB

FRONT.”

Connect a USB device to the 

(USB FRONT) port on the front of

the unit.

When connecting the USB device,

connect it directly, or via the USB cable

supplied with the USB device.

Wait until “Reading” disappears and

“ROOT” appears.

Press .

Starts playback.

Operate with the button of the remote

or unit.

You can select a track, file or folder by

pressing ENTER, while “ROOT” is

appearing.

Tip

 When playing the USB device, the play mode

can be selected. Press MENU, then select “USB

Menu.” Select “Playmode”or “Repeat.”

For details, see “To change the play mode”

(page 11). When a file on a USB device is playing,

a track or file in the folder, shuffle-playback or

programmed playback cannot be played.

 Charging begins automatically when you

connect the USB device to the  (USB FRONT)

port of the unit. When the system is turned off,

the USB device does not charge.

 If the USB device cannot be charged, disconnect

and reconnect it. For details on the charging

status of the USB device, see the operating

manual of the USB device.

Note

 The playback order for the system may differ

from the playback order of the connected digital

music player.

 Be sure to turn off the system before removing

the USB device. Removing the USB device while

the system is turned on may corrupt the data on

the USB device.

 When USB cable connection is necessary,

connect the USB cable supplied with the USB

device to be connected. For details on

connection, refer to the operation manual

supplied with the USB device to be connected.

 It may take time before “Reading” appears after

connecting, depending on the type of USB

device connected.

 Do not connect the USB device through a USB

hub.

 When the USB device is connected, the system

reads all the files on the USB device. If there are

many folders or files on the USB device, it may

take a long time to finish reading the USB

device.

 With some connected USB devices, it may take a

long time to transmit signals from the system or

to finish reading the USB device.

 When the unit is connected to a wired network,

depending on the router or network connection

conditions, the USB function may be temporarily

disabled. In this case, wait for a while, then

connect the unit to the network again.

 Compatibility with all encoding/writing software

cannot be guaranteed. If audio files on the USB

device were originally encoded with

incompatible software, those files may produce

noise or may malfunction.

Listening to a file on a USB device

Connecting a USB device

to the USB port on the front

of the unit

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Comments to this Manuals

No comments

Sony MAP-S1 User Manual Page 16

Comments to this Manuals

Related products and manuals for Unknown Sony MAP-S1