26
GB
If you intend to connect a second and
following pieces of Bluetooth
equipment, manual pairing is necessary.
1 Place the Bluetooth device to be
connected to this system within
1 meter of the system.
2 Push PAIRING on the remote
control or touch (Bluetooth)
on the Sound Bar for more than
two seconds.
3 Perform steps 3 to 6 in “Pairing
automatically” (page 24).
• “Passkey” may be called “Passcode,” “PIN
code,” “PIN number” or “Password,” etc.,
depending on the device.
• The pairing standby status of the system is
canceled after about 5 minutes. If pairing is
not successful, redo the procedure from step
1.
• If you wish to pair with several Bluetooth
devices, perform the procedure from steps 1
to 3 individually for each Bluetooth device.
• If no pairing information is stored in the
system, the system automatically enters
pairing mode when “BT AU” is selected as
input. In this case, pairing mode is not
released automatically.
Pairing this system with
a Bluetooth device
manually
t +/–
(Bluetooth)
PAIRING
2 +/–
VOL +/–
Notes
Comments to this Manuals