Sony DSC-T1 Instruction Manual download pdf (Page 3)

3

When [USB Connect] is not set

to [PictBridge] on the Setup

screen

Even if you turn on the camera, you cannot

use the PictBridge function.

Set [USB Connect] to [PictBridge].

1 Press MENU and select [USB Connect],

then press z.

2 Select [PictBridge] with v, then press

z.

Printing images

Mode switch: / /

You can select the image and print it. Set up

the camera following the procedure on page

2, and connect the printer.

• You cannot print movies.

• When you print an E-mail image, only the

JPEG image that was recorded at the same time

is printed.

• When an error notification is received from the

connected printer, the indicator flashes for

approximately 5 seconds. Check the connected

printer.

In single-image mode

a Display the image you want to

print with b/B.

b Press MENU.

The menu appears.

c Select (Print) with b /B, then

press z.

d Select [This image] with v/V,

then press z.

The print setting screen appears.

• Items that the printer does not support are

not displayed.

e Select [Quantity] with v/V,

select the number of sheets

with b/B.

You can select the number up to 20.

PTP

Normal

PictBridge

USB Connect

Mode switch

MENU

Control button

101

2/9

5M

Exit

OK

1

Off

Off

Index

Date

Quantity

Print

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments