Sony DSC-HX60 User Manual download pdf (Page 39)

When the shutter speed is 1/3 second(s) or longer, noise reduction will be done after

shooting for the same amount of time that the shutter was open. However, you cannot shoot

any more while noise reduction is in progress.

The brightness of the image on the monitor may differ from the actual image being shot.

Hint

When a faster shutter speed is used, moving subjects, such as a running person, cars, or

sea spray appear as if they are stopped. When a slower shutter speed is used, a trailing

image of the movement of the subject is captured to create a more natural and dynamic

image.

[20] How to Use Shooting Selecting a shooting mode

Aperture Priority

You can shoot by adjusting the aperture and changing the range in focus, or by defocusing the

background.

1. Set the mode dial to A (Aperture Priority).

2. Select the desired value by turning the control wheel.

Smaller F-value: The subject is in focus, but objects in front of and beyond the subject

are blurred.

Larger F-value: The subject and its foreground and background are all in focus.

3. Adjust the focus and shoot the subject.

The shutter speed is automatically adjusted to obtain proper exposure.

Note

If proper exposure cannot be obtained after setup, the shutter speed on the shooting screen

blinks. Although you can shoot as it is, resetting is recommended.

The brightness of the image on the screen may differ from the actual image being shot.

Hint

Smaller F-value (opening the aperture) narrows the range that is in focus. This allows you to

put the subject in sharp focus and blur objects in front of and beyond the subject (depth of

field becomes shallower). Larger F-value (narrowing down the aperture) widens the range

that is in focus. This allows you to shoot the depth of the scenery (depth of field becomes

deeper).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 171 172

No comments

Sony DSC-HX60 User Manual Page 39