Sony KLV-27HR3 User Manual download pdf (Page 18)

– 17 –

WA1

RM-Y1108

Stripe noise during playback/recording

of a VCR.

Video head interference. Keep your VCR away from the TV.

Leave a space of 30 cm between your VCR and the TV set to avoid

noise.

Avoid installing your VCR in front or at the side of the TV set.

Poor or no picture (screen is dark), but

good sound.

Using the menu system, select the “Picture Adjustment” menu and

select “Reset” to return to the factory settings (page 19).

Noisy picture when viewing a TV

channel.

Using the menu system, select the “Manual Programme Preset”

option in the “Set Up” menu and adjust Fine Tuning (AFT) to

obtain better picture reception (page 26).

Using the menu system, set the "Noise Reduction" option in the

“Picture Adjustment” menu to reduce the noise in the picture (page

19).

Distorted picture when changing

programmes or selecting teletext.

Turn off any equipment connected to the Scart connector on the rear

of the TV set.

If the item you want to select appears in a pale colour is because you

cannot select it.

Wrong characters appear when viewing

teletext

Using the menu system, enter the “Country” option in the “Set Up”

menu and select the country in which you operate the TV set (page

23).

No sound/Noisy sound

Good picture, no sound. Press the 2 +/- or

% (mute) on the remote control.

Check that “TV Speakers” option is set to “On” in the “Features”

menu (page 22).

Audio noise.

Unable to receive a stereo or dual sound

broadcast

Make sure that the aerial is connected.

Keep the aerial cable away from other connecting cables.

Do not use 300-ohm twin lead cables as interference may occur.

Communication problems may occur if the infrared communication

equipment (e.g. infrared cordless headphones) is used near the TV.

Please use headphones other than infrared cordless headphones,

move the infrared transceiver away from the TV until the noise is

eliminated, or move the transmitter and receiver of the infrared

communication equipment closer together.

Using the menu system, select “Audio Filter” from the “Manual

Programme Preset” menu. Next select “Low” or “High” (see page

26).

Check that the “Audio Filter” option in the “Manual Programme

Preset” menu is set to “Off”.(see page 26).

Problem Possible solution

Cannot operate the menu

Strange sound

The TV cabinet creaks. Changes in room temperature sometimes causes the TV cabinet to

expand or contract, which can make slight noises. This does not

indicate a malfunction.

The TV buzzes. There might be a surge sound when turning on the TV. This does

not indicate a malfunction.

Remote Control

Remote control does not function.

The (standby) or TV (power on)

indicators on the TV flashes

Replace the batteries.

Contact your nearest Sony service centre.

Problem Possible solution

If you continue to experience problems, have your TV serviced by qualified personnel.

Never open the casing yourself.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Comments to this Manuals

No comments

Sony KLV-27HR3 User Manual Page 18

Comments to this Manuals

Related products and manuals for TVs & monitors Sony KLV-27HR3