Sony PCV-RX750 User's Guide download pdf (Page 48)

VAIO Digital Studio System Reference Manual

Installing a Memory Module

1 Choose the size of the memory module and configuration as shown

in the following table. Memory modules can vary in size between

sockets. The minimum memory size is 128 MB. The maximum

memory size is 1.5 GB. The BIOS automatically detects the type, size

and speed of the memory modules.

2 If necessary, remove the memory module you wish to replace (see

“Removing a Slot Cover” on page 37).

3 Remove the new memory module(s) from its anti-static package.

Hold the memory module only by its edges to prevent static-

electricity damage.

4 Remove the side panel (see “Removing the Side Panel” on page 24).

5 Remove the power supply (see “Removing the Power Supply” on

page 44).

6 Remove the screw that secures the AGP add-in card to the chassis.

7 Press down on the handle at the edge of the AGP slot.

! Before opening the system unit, save and close all open files, exit all open

applications, turn off the power to all attached peripheral devices, shut

down the computer, and unplug the power cord.

Memory module configurations (MB)

* Your computer ships with at least 256 MB. DDR-SDRAM is expandable to 1.5 GB. Your model

may ship with more than 256 MB DDR-SDRAM depending on the configuration you purchased.

DIMM1 DIMM2 DIMM3

128, 256, 512 128, 256, 512 128, 256, 512

✍ Use only PC2100 memory. Your system does not support EDO, buffered DDR-

SDRAM, or PC100/133 SDRAM memory.

! Touch any exposed metal part of the chassis to discharge static

electricity in your body before handling a memory module.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 95 96

No comments

Sony PCV-RX750 User's Guide Page 48