Sony SNC-DF70P User Manual Page 30
- Page / 67
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Administrating the Camera
Setting the Camera Image and Audio — Camera setting Menu
30
AGC (Automatic Gain Control)
Adjusts the gain automatically according to the lighting
conditions of the subject.
Back light compensation
Select On to activate the backlight compensation, or Off
to deactivate it.
Lens adjust
Select the iris convergence level for the auto-iris lens
from 0 to 255.
Shutter mode
Select the electronic shutter mode, Auto or Manual.
The setting items required for each setting appear.
Shutter speed
Select the electronic shutter speed from among the
following:
SNC-DF70N:
1/10000, 1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/100,
1/60 (seconds).
SNC-DF70P:
1/10000, 1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/120,
1/50 (seconds).
Tip
Flicker from fluorescent lamps or similar can be reduced
by setting the
Shutter mode
to
Manual
and
Shutter
speed
to
1/100
.
Gain
Select the gain (dB) from among the following:
0 dB, 6 dB, 12 dB, 18 dB
Brightness
Tweaks the exposure set in the exposure mode. It is
brighter when a large value is selected, and it is darker
when a small value is selected. The value among –5 to 5
can be set.
Saturation
Select the saturation in 7 steps, from –3 to 3.
Selecting 3 gives the image with the highest saturation.
Sharpness
Select the sharpness in 7 steps, from –3 to 3.
Selecting 3 gives the image with the highest sharpness.
Contrast
Select the contrast in 7 steps, from –3 to 3.
Selecting 3 gives the image with the highest contrast.
OK/Cancel
See “Buttons common to every setting menu” on page
24.
User preset
You can save the present settings in the camera as the
custom, or you can load the settings saved in the camera.
Save: Click to save the present settings of the Picture
tab.
Load: Click to load the saved settings. To use them,
click OK.
Day/Night Tab
Use this tab to set the day/night function of the camera.
The day/night function consists of five tabs.
Disable
Always works in day mode.
Auto
Normally works in day mode. It switches automatically
to night mode in a dark place.
The switching timing can be adjusted by the following
parameters. When the auto gain control is set to Off, the
camera does not switch to the night mode.
Level: High or Low indicates a brightness level.
Time: Select invalid time so that the camera does not
react to changes in light and darkness.
Manual
Switch the day/night mode manually. When you select
Manual, On and Off are displayed. When you select
On, the camera works in night mode. When you select
Off, it works in day mode.
Timer
Normally works in day mode. It switches to night mode
at the time you set in the Schedule setting menu. The
day/night function normally works in day mode.
- Network Camera 1
- Owner's Record 2
- NOTICE TO USERS 3
- Table of Contents 4
- Features 6
- How to Use This User’s 7
- Precautions 7
- System Requirements 8
- Preparation 10
- Accessing the Camera 11
- Using the Web Browser 11
- Basic Configuring by the 12
- Administrator 12
- Administrator and User 13
- Logging in to Homepage 14
- About Viewers 15
- Configuration of Main 16
- Controlling the Monitor 17
- Capturing a Monitor 18
- Sending an Image File 19
- Recording a Still Image 20
- Controlling Alarm output 20
- Controlling Day/Night 21
- Function 21
- Switching TCP/UDP 21
- Transmission Mode 21
- Operating the Camera 22
- Basic Operations of 23
- Administrator Menu 23
- General note on setting menus 24
- — System setting menu 25
- Date & time Tab 26
- Initialize Tab 27
- System log Tab 27
- Access log tab 27
- Setting the Camera 28
- Image and Audio 28
- Picture Tab 29
- Day/Night Tab 30
- MPEG4 Tab 31
- JPEG Tab 31
- — Network setting Menu 32
- PPPoE Tab - Setting of PPPoE 33
- Connection 33
- Administrating the Camera 34
- — User setting Menu 36
- — Security setting Menu 37
- — e-Mail (SMTP) setting 38
- — FTP client setting Menu 41
- — Image memory setting Menu 43
- Image Memory Function when 44
- Detecting the Alarm 44
- Directory Structure of Image 46
- — Alarm output setting Menu 47
- Trigger setting Menu 48
- FTP client 49
- Image memory 49
- Alarm output 1, 2 49
- Day/Night 49
- — Schedule setting Menu 50
- — Alarm buffer setting Menu 51
- Setting the Motion 52
- Detection Function 52
- Using the Supplied 54
- Setup Program 54
- Date time Tab 55
- PPPoE Tab 55
- Using the SNC audio 56
- Connecting the Camera to the 57
- Computer 57
- Using the SNC video 58
- Using the Custom 59
- Homepage Installer 59
- Assigning the IP 61
- Address to the Camera 61
- Using ARP Commands 61
- Using the SNMP 62
- Specifications 64
- 32 inches), Mini-plug 65
- 8 inches) 65
- Sony Corporation 67
Related products and manuals for Security cameras Sony SNC-DF70P
(2 pages)
Security cameras Sony CH140 User Manual
(2 pages)
(2 pages)
Security cameras Sony 720P User Manual
(2 pages)
(2 pages)
Security cameras Sony SNCHM662 Datasheet
(2 pages)
(2 pages)
Security cameras Sony SNCZR550 Datasheet
(2 pages)
(2 pages)
Security cameras Sony SNCZP550 Datasheet
(2 pages)
(2 pages)
© 2020, manymanuals.com. All rights reserved. | 1.288 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals