Sony LF-X1 User Manual download pdf (Page 11)

Step 3 Setting Up the NetAV Function

Preparations Prior to Access from a Remote Location

Pre-release version

(2) Clear the [Automatic IP address configuration (DHCP)] check box.

The information in the fields will clear, which releases the “automatic”

IP settings.

(3) Enter again the information you jot down in step (1) - with one exception:

For the IP address, be sure to change the last two digits to 64*.

* If you entered a different IP address for the port forwarding or DMZ settings of your

router, make the last two digits match that address.

(4) Click [Set] to lock in the IP address and other important information on

this screen.

z Tip

Jot down the IP address that you specify. You will need it to establish a

connection to the base station from your computer.

Connect to the Internet to confirm that LAN settings are correct. Go to the

Web function. If the web page appears, your settings are correct. If the web

page does not appear, you may not have entered the information correctly in

Step 2. Go back and confirm that information has been entered correctly.

Configure the base station NetAV.

Select [Settings], [Base station], [NetAV Settings], and then [Enable/Disable

NetAV].

To send video from the base station to a remote computer in the [Enable/

Disable NetAV] screen as described below.

Select [Enable]

Specify a port number

(5021 is commonly used)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

No comments

Sony LF-X1 User Manual Page 11