Sony STR-DG1100 User Manual Page 55
- Page / 130
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
55
GB
Amplifier Operations
Settings for the audio
(Audio settings menu)
You can use the Audio settings menu to make
settings for the audio to suit your preference.
Select “Audio” in the Settings menu. For
details on adjusting the parameters, see “7:
Operating the receiver using the GUI
(Graphical User Interface)” (page 37).
x A/V Sync
(Synchronizes audio and video
output)
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display. You can adjust the delay from 0 ms to
300 ms in 10 ms steps.
Notes
• This function is useful when you use a large LCD
or plasma monitor or a projector.
• You can adjust the delay to up to 300 ms
– The sampling frequency is less than 48 kHz.
– 2 channel analog signals.
• You can adjust the delay to up to 150 ms
– The sampling frequency is 88.2 kHz or 96 kHz.
Although the parameter appears up to 300 ms at
this time, you cannot adjust the delay by more than
150 ms.
• This function does not work in the following cases.
– The multi-channel input is selected.
– Input signals of which the sampling frequency is
more than 96 kHz are being received.
– The multi-channel Linear PCM signals are
received via an HDMI IN jack.
– “2ch Analog Direct” is being used.
– “Neural-THX” is selected as the sound field
type.
x Dual Mono
(Digital broadcast language
selection)
Lets you select the language you want to listen
to during a digital broadcast. This feature only
functions for Dolby Digital sources.
• MAIN/SUB
Sound of the main language will be output
through the front left speaker, and sound of
the sub language will be output through the
front right speaker simultaneously.
•MAIN
Sound of the main language will be output.
•SUB
Sound of the sub language will be output.
• MAIN+SUB
Mixed sound of both the main and sub
languages will be output.
x Decode Priority
(Digital audio input decoding
priority)
Lets you specify the input mode for the digital
signal input to the DIGITAL IN jacks or
HDMI IN jacks.
•PCM
When signals from the DIGITAL IN jack are
selected, PCM signals are given priority (to
prevent interruption when playback starts).
However, when other signals are input, there
may be no sound, depending on the format.
In this case, set this item to “AUTO.”
When signals from the HDMI IN jack are
selected, only PCM signals are output from
the connected player. When signals in any
other format are received, set this item to
“AUTO.”
•AUTO
Automatically switches the input mode
between DTS, Dolby Digital, or PCM.
Note
When set to “AUTO” and the sound from the digital
audio jacks (for a CD, etc.) is interrupted when
playback starts, set to “PCM.”
Amplifier Operations
Audio settings menu parameters
- Multi Channel 1
- AV Receiver 1
- About This Manual 3
- Table of Contents 4
- Front panel 6
- Rear panel 9
- Remote commander 11
- Name Function 12
- Getting Started 13
- 1: Installing speakers 14
- 2: Connecting speakers 16
- 3: Connecting the monitor 18
- How to hook up your 20
- Connecting components with 21
- CD on a Super Audio CD player 22
- HDMI jacks 26
- Notes on connecting cables 27
- Notes on HDMI connections 27
- Connecting a DVD player, Blu 28
- CATV system 29
- To display Closed Caption 32
- To connect a recording 32
- AM loop antenna (aerial) 34
- (supplied) 34
- Connecting the AC power cord 35
- (mains lead) 35
- Performing initial setup 35
- Inserting batteries into the 36
- About the command mode 36
- (Graphical User 37
- Interface) 37
- TV screen 37
- Navigating through menus 39
- Selecting the front speakers 41
- 9: Calibrating the 42
- 2 Set up the optimizer 42
- 6 Press b 44
- 7 Press to select “Start.” 44
- 9 Measurement starts 44
- 1 Confirm the measurement 44
- 2 Press to select “Next.” 45
- 5 Press 45
- Optional menu parameters for 48
- Enhanced Setup settings 48
- Playback 49
- To avoid damaging your 50
- MULTI CHANNEL DECODING lamp 52
- An example of the display 52
- • Refer to the operating 54
- TV and VCR 54
- Settings for the audio 55
- Settings for the video 56
- Settings for HDMI (HDMI 56
- Settings for the system 57
- Enjoying Surround Sound 58
- Types of 2CH mode 58
- Types of A.F.D. mode 59
- If you connect a sub woofer 60
- Types of music/movie mode 61
- Adjusting the sound 62
- 1 Choose the sound field 62
- 2 Press b to select “Custom 62
- Custom Settings menu 63
- Using the surround back 64
- (Surround back decoding mode) 65
- (NIGHT MODE) 66
- Advanced Speakers Setting Up 67
- Making settings with the 67
- Manual Setup menu 67
- Manual Setup menu parameters 67
- Speaker Pattern menu 69
- Tone menu 70
- Test Tone menu parameters 71
- Other menu parameters of 71
- Speaker settings 71
- Clearing stored equalizer 74
- Tuner Operations 75
- Automatic tuning 75
- Direct tuning 76
- Presetting radio stations 77
- Listening to satellite 78
- Connecting the XM Radio or 79
- SIRIUS Satellite Radio 79
- Checking the XM Radio ID or 79
- SIRIUS ID number 79
- Presetting the channels 82
- (SIRIUS only) 83
- XM Radio message list 85
- Converting analog video 87
- Using the DIGITAL MEDIA 87
- PORT adapter 87
- 2 Select content from the 89
- DIGITAL MEDIA PORT message 90
- To cancel naming input 91
- (INPUT MODE) 92
- Changing the display 95
- Recording onto a MiniDisc or 99
- To record digital sound 100
- To connect speakers 100
- To set up speakers 100
- Operating without 101
- Overview of the menus 102
- Other Operations 103
- Performing auto calibration 106
- Selecting a sound field type 107
- Listening to the FM/AM radio 107
- 2 Press MEMORY 108
- 3 Press PRESET + or PRESET – 108
- 4 Press ENTER 108
- Operating each 110
- Using the Remote 111
- To cancel programming 112
- The numeric codes 112
- Clearing all the contents 115
- 2 Release MASTER VOL – 115
- Glossary 116
- Precautions 118
- Troubleshooting 119
- Remote control 122
- Specifications 123
- Additional Information 129
Related products and manuals for Receivers and Amplifiers Sony STR-DG1100
(136 pages)
(2 pages)
(2 pages)
© 2020, manymanuals.com. All rights reserved. | 1.170 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals