Sony KDS-55A2020 User Manual download pdf (Page 57)

Other Information

F:\Worker\SONY SX-A Black\3198047111\050SPC.fm

masterpage:3 columns Right

KDS-50A2020/KDS-55A2020/KDS-60A2020

3-198-047-11(1)

Sound

Channels

Certain programs on DVD or

other digital sources display a

loss of detail, especially during

fast-motion or dark scenes

❏ The compression used by certain digital broadcasts and DVDs may cause your

TV’s screen to display less detail than usual, or cause artifacts (small blocks or

dots, pixelations) to appear on your screen. This is due to your TV’s large screen

and ability to show very fine detail, and is normal for certain digitally recorded

programs. Adjust the Reality/Clarity in the DRC Palette setting (see page 35) to

optimize the picture while viewing these sources.

Condition Explanation/Resolution

Good picture, no sound ❏ Press MUTING so that Muting disappears from the screen (see page 24).

❏ Make sure the Speaker option is set to On in the Sound setting (see page 38).

❏ Make sure the MTS option is set to Stereo or Mono (see page 37).

❏ When the HDMI IN input is in use, surround sound, such as AC-3 and DTS,

cannot be input. Change the sound setting for the external input device to Linear

PCM.

Audio noise ❏ Make sure that the antenna is connected using the 75-ohm coaxial cable.

❏ Keep the antenna cable away from other connecting cords.

❏ To avoid TV interference, make sure to use an undamaged antenna cable.

Cannot gain enough volume

when using a cable box

❏ Increase the volume of the cable box using the cable box’s remote control. Then

press TV (FUNCTION) once (the TV indicator lights up) and adjust the TV’s

volume.

Sound seems weak or

insufficient

❏ The TV’s audio might be set to Auto SAP or Mono, when it might be better set to

Stereo. In the Sound setting (see page 37), set the MTS setting to Stereo. If

already set to Stereo, switch to Mono (which may reduce background noise

during weak stereo broadcasts).

Cannot raise the volume on

external speakers

❏ If the Speaker option is set to Off and the Audio Out option is set to Fixed (in

order to output the sound to your audio system), use your audio receiver to adjust

the sound (see page 38). Or, to use the TV remote control, set the Audio Out

option to Variable.

❏ To turn on the TV speakers, set the Speaker option to On (see page 38).

No audio for HDMI ❏ Confirm DVD player, set-top-box audio settings. Select 2 channel LPCM audio.

Condition Explanation/Resolution

Cannot receive upper channels

(UHF) when using an antenna

❏ Press ANT to select the VHF/UHF input (see page 22).

❏ Use Auto Program in the Channel setting to add receivable channels that are not

presently in the TV’s memory (see page 41).

Cannot receive any channels

when using cable TV

❏ Use Auto Program in the Channel setting to add receivable channels that are not

presently in the TV’s memory (see page 41).

❏ Press ANT to select the CABLE input (see page 22).

Cannot receive or select

channels

❏ Use Auto Program in the Channel setting to add receivable channels that are not

presently in TV memory (see page 41).

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 66 67

Comments to this Manuals

No comments

Sony KDS-55A2020 User Manual Page 57

Comments to this Manuals

Related products and manuals for Projectors Sony KDS-55A2020