Sony SLV-779HF User Manual download pdf (Page 88)

Additional Information

General setup information

Setting the RF unit

when connecting the VCR to the TV

using only the antenna cable, you must

set the RF UNIT switch on the rear of the

VCR so that the TV can receive the

correct signal from the VCR.

Set the RF UNIT switch on the rear of the VCR to CH3 or CH4,

whichever channel is not used in your area. If both are used, set the

switch to either channel.

Press l/Cl) POWER to turn on the VCR.

Press TV/VIDEO to turn on the VIDEO indicator in the VCR's display

window.

Press CH +/- to display a channel number in the display window.

Select an active channel number in your area.

Turn on your TV and set it to the channel you selected in step 1

(channel 3 or 4).

The channel you selected in step 4 appears on the TV screen. If the

channels change when you press CH +/-, you have made the correct

setting.

Whenever you use the VCR, set the TV to the channel selected in step 1.

88 Additional Information

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 99 100

No comments

Sony SLV-779HF User Manual Page 88