Sony PSP-1003 User Manual download pdf (Page 101)

101

Settings

Network Settings

7 Check the settings.

This screen displays the setting details. Press the left button to return to the

previous screens to correct any of the settings, if necessary.

When you have finished selecting your settings, press the right button to

go to the next screen.

8 Save the connection.

Press the button to save the connection on your system.

9 Test the connection.

Before testing the connection, check that the PSP™ system's WLAN

switch is turned on.

Select "Test Connection", and then press the button. The system will

connect to the selected access point.

10 Confirm the connection test results.

If the connection is successful, information about the network connection

is displayed. Press the button to end the connection test.

Hints

• The system will also perform an Internet connection test after connecting to an access

point. The results of the Internet connection test will be shown in the connection results

screen.

• If the connection test fails, follow the on-screen instructions to check the settings.

Network settings for the connection can be changed from the options menu

( page 102). For additional information, refer to the instructions supplied with the

network device and by your Internet service provider.

• If the IP address and DNS information will be obtained by a DHCP server, select

"Automatic" for both settings.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 131 132

No comments

Sony PSP-1003 User Manual Page 101